BMW F15 40e - Printable Version +- CarTechnoloGY (https://cartechnology.co.uk) +-- Forum: Discussions All about Software and Hardware (https://cartechnology.co.uk/forumdisplay.php?fid=310) +--- Forum: Automotive Help & Discussions / Software and Hardware (https://cartechnology.co.uk/forumdisplay.php?fid=40) +---- Forum: BMW - Mini - Rolls Royce (https://cartechnology.co.uk/forumdisplay.php?fid=61) +---- Thread: BMW F15 40e (/showthread.php?tid=53383) |
BMW F15 40e - Deimis - 09-07-2019 Hello, how can I delete (EME safety cutout: resistance too high) error from EME module ? I have no connection with eme module and can't charge battery with plug, battery now is 32,60 %. Thank you RE: BMW F15 40e - inspi1981 - 09-07-2019 Then connect safety circuit RE: BMW F15 40e - vanos - 09-07-2019 What is the Fault Code ? EME is respond in diag session ? RE: BMW F15 40e - Deimis - 15-07-2019 Anybody using eos battery tester for clear crash data from f15 sme? Is it possible with tool 32? Looking for help to clear crash data from sme battery. Thank you RE: BMW F15 40e - Deimis - 19-09-2019 Hello, is it possible to reset isn in used EME module? Error 222C02 Electronic immobiliser EWS RE: BMW F15 40e - cursor - 19-09-2019 (15-07-2019, 19:40 PM)Deimis Wrote: Anybody using eos battery tester for clear crash data from f15 sme? Is it possible with tool 32? Looking for help to clear crash data from sme battery. Thank youWhen I have this erros in G30, I update ACSM, SBE, EME with Esys. Then I can delete this error (19-09-2019, 11:37 AM)Deimis Wrote: Hello, is it possible to reset isn in used EME module? Error 222C02 Electronic immobiliser EWS I don't have tool for this, when i repair G30. I put back PCB with TRICORE from original EME. Then I have Internal error in EME. When I read errors with Tool32, it is "incorect serial number in inverter". I put back motorola from original Inverter, and its start working |