Peugeot 207 Valeo BSI eeprom 95128 km change to dashboard km and virgin please - Printable Version +- CarTechnoloGY (https://cartechnology.co.uk) +-- Forum: All About IMMO/ECU , ChiPTuninG , Dashboard , Locksmith , AirbaG , Carradio (https://cartechnology.co.uk/forumdisplay.php?fid=3) +--- Forum: DASHBOARD (https://cartechnology.co.uk/forumdisplay.php?fid=10) +--- Thread: Peugeot 207 Valeo BSI eeprom 95128 km change to dashboard km and virgin please (/showthread.php?tid=53398) |
Peugeot 207 Valeo BSI eeprom 95128 km change to dashboard km and virgin please - ns79 - 09-07-2019 Hi, I replaced BSI and ECU with the donated car. The BSI now has a mileage of 99304 km and a dashboard of 203126 km. Does this have to be matched? And do I have to do Virgin eeprom BSI? At ECU i made immo off. Thank you RE: Peugeot 207 Valeo BSI eeprom 95128 km change to dashboard km and virgin please - poita - 10-07-2019 there is your file reset dont forget thanks and rep thanks RE: Peugeot 207 Valeo BSI eeprom 95128 km change to dashboard km and virgin please - ns79 - 10-07-2019 Hi, thanks a lot for help I did write your BSI eeprom but still i have the same problems. ECU and BSI are from donors car...keys are not from donors car. Engine works and everything is fine. Only this BSI error and when I do the configuration in BSI after a while and removing the positive voltage, the settings return as they were on the donor's car i think (airbag problems, fog lamps, rear reverse light, etc ...) For ECU I did Immo off. Now I have a F4BA error in BSI ... and Antitheft on the display,too. Maybe the problem now is the difference in the VIN number between BSI and Dashboard? Also when i configure new chassis number with Diagbox after removing the positive voltage BSI restore the old chassis number? Or maybe Steering Column Lock now is problem? I need this VIN number in ECU,BSI,Dashboard: VF34E9HXC9S188933 Please help and tell me where to go? I'm stuck for days with this already Regards Neven from Croatia |