TV on cic e92 bench setup - Printable Version +- CarTechnoloGY (https://cartechnology.co.uk) +-- Forum: Discussions All about Software and Hardware (https://cartechnology.co.uk/forumdisplay.php?fid=310) +--- Forum: Automotive Help & Discussions / Software and Hardware (https://cartechnology.co.uk/forumdisplay.php?fid=40) +---- Forum: BMW - Mini - Rolls Royce (https://cartechnology.co.uk/forumdisplay.php?fid=61) +---- Thread: TV on cic e92 bench setup (/showthread.php?tid=53520) |
TV on cic e92 bench setup - ccfj1 - 12-07-2019 Hi all, I have a problem thats driving me mad.... I have a full bench setup. CAS, jbbr, key, elv, kombi, cic, controler and screen. it all works perfectly, i can code and program etc, FSTools work, inpa, ista (d and p). inpa, edabas. you name it it all works. nav updates etc I've now added TV, combox and diversity antennas etc... again all working However. I can not get a tv picture in screen, all i get is I have coded TVIM for the cic and i can confirm that it is enabled. but still i get the block screen. I assume that the bench "thinks" its handbrake is not on. Does anyone have any advice as to get this working?? RE: TV on cic e92 bench setup - jb2005 - 12-07-2019 Try to code CIC with video in motion. RE: TV on cic e92 bench setup - ccfj1 - 12-07-2019 Thanks for the email mate... I've done that, several times, that does not work. RE: TV on cic e92 bench setup - dumitru.o - 12-07-2019 if you believe this to be the issue: I assume that the bench "thinks" its handbrake is not on. then there is a line in coding to disable it.....but i don t think this is the issue. Maybe you should try on the bench to use a canbridge instead of CAS.....saves you of lot of headaches my assumption is that the wheelspeed value is missing from the CAS (which it s normal) or it s invalid check this out: RE: TV on cic e92 bench setup - ccfj1 - 12-07-2019 Hi Dumitru, Many thanks mate, i have coded the handbrake out as well same thing, you could be right and it is a speed sensor thing. Ive just done a search on the canbridge and cant find any info.?? Love your bench setup BTW RE: TV on cic e92 bench setup - dumitru.o - 16-07-2019 hi that is not my bench setup but i have a similar one. here is the canbridge i have: https://carsystems.com.ua/diagnostic-modules-en/can-bridge-en RE: TV on cic e92 bench setup - ccfj1 - 16-07-2019 Perfect thanks. There is no prices on there, what did you pay for yours? RE: TV on cic e92 bench setup - dumitru.o - 16-07-2019 you can get in touch with them here: eBay i've got mine from a local re-seller in Romania - here cost: 200 euros RE: TV on cic e92 bench setup - jararak - 16-07-2019 guys, can you give me please pinout for tvmodule? and maybe coding options? thanks RE: TV on cic e92 bench setup - ccfj1 - 17-07-2019 for the old style tv module 1 = gnd 11 = +12v tv - 4 = Vid + = 18 - cic tv - 12 = Shield = 28 - cic tv - 13 = Vid - = 27 - cic |