CarTechnoloGY
BMW E84 Problem After Coding - Printable Version

+- CarTechnoloGY (https://cartechnology.co.uk)
+-- Forum: Discussions All about Software and Hardware (https://cartechnology.co.uk/forumdisplay.php?fid=310)
+--- Forum: Automotive Help & Discussions / Software and Hardware (https://cartechnology.co.uk/forumdisplay.php?fid=40)
+---- Forum: BMW - Mini - Rolls Royce (https://cartechnology.co.uk/forumdisplay.php?fid=61)
+---- Thread: BMW E84 Problem After Coding (/showthread.php?tid=53537)



BMW E84 Problem After Coding - atomantmk - 12-07-2019

After coding of folding mirrors with NCS light module was dead, I have repaired and everything was back except driver windows, closing and opening from button works but not with fob key when you press long on the key.

Triple turn signal was gone too but I think that I must to look in CIC menu for this option.

I have change master language on CIC to be English UK and language 1 English US, language 2 German and language 3 Spanish but after coding it was just like VO coding.

Do I must to play with VO and change to English?

Here are TRC files from CAS and NFRM, if someone has time to look and tell what is wrong with driver windows?


RE: BMW E84 Problem After Coding - Lemta - 12-07-2019

That's a horrible situation to be in.

I think the turn signal is linked to the idrive where you have to go and activate it again. Unfortunately I don't have the answers to the other questions but I'm sure someone will along to help.

Just curious, did you have the car running when coding or was it just the ignition on?


RE: BMW E84 Problem After Coding - atomantmk - 13-07-2019

No, I use always CTEK MXS25 when do coding or programming, it's always 13.5 volts.


RE: BMW E84 Problem After Coding - Lemta - 13-07-2019

(13-07-2019, 06:12 AM)atomantmk Wrote:  No, I use always CTEK MXS25 when do coding or programming, it's always 13.5 volts.

You said you repaired the NFRM module so I take it you didn't replace it? Have you tried to VO code the NFRM module to factory settings and then adding the folding mirror again?


RE: BMW E84 Problem After Coding - atomantmk - 13-07-2019

Yes, NFRM is VO coded, triple turn signal activate from iDrive and problem with driver window was solved with ISTA initialising power windows, CIC coded with only one language and now is everything okay.
Mirror folding stays for future time.
All problems are now gone!


RE: BMW E84 Problem After Coding - warhol2010 - 24-07-2019

FRM is dead
Fix the FRM 
(12-07-2019, 21:15 PM)atomantmk Wrote:  After coding of folding mirrors with NCS light module was dead, I have repaired and everything was back except driver windows, closing and opening from button works but not with fob key when you press long on the key.

Triple turn signal was gone too but I think that I must to look in CIC menu for this option.

I have change master language on CIC to be English UK and language 1 English US, language 2 German and language 3 Spanish but after coding it was just like VO coding.

Do I must to play with VO and change to English?

Here are TRC files from CAS and NFRM, if someone has time to look and tell what is wrong with driver windows?