CarTechnoloGY
ACC internal fault - Printable Version

+- CarTechnoloGY (https://cartechnology.co.uk)
+-- Forum: Discussions All about Software and Hardware (https://cartechnology.co.uk/forumdisplay.php?fid=310)
+--- Forum: Automotive Help & Discussions / Software and Hardware (https://cartechnology.co.uk/forumdisplay.php?fid=40)
+---- Forum: VAG Group (VW - Audi - Seat - Skoda - Bentley) (https://cartechnology.co.uk/forumdisplay.php?fid=55)
+---- Thread: ACC internal fault (/showthread.php?tid=54329)



ACC internal fault - phydor - 30-07-2019

Hi there guys, does anybody know why i'm getting this error on both radar sensors?On one of them i have seen some damage, the master, right one.Anybody, any thoughts?


RE: ACC internal fault - ototest - 30-07-2019

(30-07-2019, 13:32 PM)phydor Wrote:  Hi there guys, does anybody know why i'm getting this error on both radar sensors?On one of them i have seen some damage, the master, right one.Anybody, any thoughts?

What you did ? Tell whole story


RE: ACC internal fault - phydor - 30-07-2019

(30-07-2019, 13:38 PM)ototest Wrote:  
(30-07-2019, 13:32 PM)phydor Wrote:  Hi there guys, does anybody know why i'm getting this error on both radar sensors?On one of them i have seen some damage, the master, right one.Anybody, any thoughts?

What you did ? Tell whole story

Nothing, i have been driving the  the car for a a week and  i noticed that start stop wasn't functioning.Read the car, i have seen that J428 was in CP.I think this was made deliberately just not to have the ACC fault lit up in dash, because they are connected.Removed it , start/stop started to work but after one day "start / stop malfunction" along with lots of "data bus functional impairment" and "missing mssages from units.Everything was working except start/stop& acc& sensors, as you can see, but those missing message faults were active/static.And the error with the distance regulation remained in dash.I switched the sensors, put them back to their place, J850 got recognized now with same internal fault as J428.I think it s a matter of time until the start/stop malfunction will.come again with all those missing message faults.


RE: ACC internal fault - Provag - 30-07-2019

Can be a software deviation or a hardware deviation. if its a soft can be updated if its a hard has to be changed . post the vin so I can look better if there is a tpi


RE: ACC internal fault - phydor - 30-07-2019

(30-07-2019, 13:50 PM)Provag Wrote:  Can be a software deviation or a hardware deviation. if its a soft can be updated if its a hard has to be changed . post the vin so I can look better if there is a tpi

WAUZZZ4G0DN059788


RE: ACC internal fault - Provag - 31-07-2019

no tpi related to this faults. what does odis suggest u to do ?


RE: ACC internal fault - damian475 - 31-07-2019

Repalce acc i think.


RE: ACC internal fault - Provag - 31-07-2019

look in mirrorserver if there is a soft update for this control units