Etka 8.1 update 1300 fails - Printable Version +- CarTechnoloGY (https://cartechnology.co.uk) +-- Forum: Discussions All about Software and Hardware (https://cartechnology.co.uk/forumdisplay.php?fid=310) +--- Forum: Automotive Help & Discussions / Software and Hardware (https://cartechnology.co.uk/forumdisplay.php?fid=40) +---- Forum: VAG Group (VW - Audi - Seat - Skoda - Bentley) (https://cartechnology.co.uk/forumdisplay.php?fid=55) +---- Thread: Etka 8.1 update 1300 fails (/showthread.php?tid=54515) |
Etka 8.1 update 1300 fails - jpetersack - 03-08-2019 Running Etka 8.1 in 64 bit Windows with emulator. Has been working fine until this week. I am at 1299 and 1300 downloads and tries to install. I get about 8 messages about Process Exists and then finally says Update failed (on both VW and Audi). Any suggestions? Joe RE: Etka 8.1 update 1300 fails - BmwMerc - 03-08-2019 (03-08-2019, 07:17 AM)jpetersack Wrote: Running Etka 8.1 in 64 bit Windows with emulator. Has been working fine until this week. I am at 1299 and 1300 downloads and tries to install. I get about 8 messages about Process Exists and then finally says Update failed (on both VW and Audi). Any suggestions? all good for me. just updated my etka yesterday. RE: Etka 8.1 update 1300 fails - alpaslanyasar - 04-08-2019 same here, 1300 works without any problem RE: Etka 8.1 update 1300 fails - SeedStorm - 04-08-2019 Delete the file and download it again. RE: Etka 8.1 update 1300 fails - jpetersack - 07-08-2019 I have tried this many times. The VW update works fine but the Audi 1300 one fails. Running the diagnostic is says there is a crcerrora error message. Is there any way to reinstall 1299 in case that is really the problem? Joe RE: Etka 8.1 update 1300 fails - spacewalker - 08-08-2019 my also working good today 1301 and no problem with update RE: Etka 8.1 update 1300 fails - bigdiez - 08-08-2019 ...here too --> VW/AUDI update1301 works great ! I had problem with Audi 1300, too -> as SeedStorm says: download complete again... RE: Etka 8.1 update 1300 fails - hab febigolf - 10-10-2019 Hello I have a problem with etka 8.1 update 1309 does not pass help me please thanks how to do it please RE: Etka 8.1 update 1300 fails - MrEdgar - 15-10-2019 (10-10-2019, 07:09 AM)hab febigolf Wrote: Hello Take a look: https://cartechnology.co.uk/showthread.php?pid=479213#pid479213 |