CarTechnoloGY
Solved ✔ Volvo v60 crash P31658440 - Printable Version

+- CarTechnoloGY (https://cartechnology.co.uk)
+-- Forum: All About IMMO/ECU , ChiPTuninG , Dashboard , Locksmith , AirbaG , Carradio (https://cartechnology.co.uk/forumdisplay.php?fid=3)
+--- Forum: AIRBAG (https://cartechnology.co.uk/forumdisplay.php?fid=13)
+--- Thread: Solved ✔ Volvo v60 crash P31658440 (/showthread.php?tid=54531)



Volvo v60 crash P31658440 - tintin2005 - 03-08-2019

Can you please clean this file for me? 

volvo v60 d6 awd plug-in hibrid.

volvo :    P31658440
bosch:    0 285 013 939
             T11801310872 18-01-31
serial:  1 180 13 1087 2939

Thanks in advance!!


RE: Volvo v60 crash P31658440 - volavka - 03-08-2019

(03-08-2019, 12:43 PM)tintin2005 Wrote:  Can you please clean this file for me? 

volvo v60 d6 awd plug-in hibrid.

volvo :    P31658440
bosch:    0285013939
             T11801310872 18-01-31
serial:  1 180 13 1087 2939

Thanks in advance!!



RE: Volvo v60 crash P31658440 - tintin2005 - 09-09-2019

(03-08-2019, 15:05 PM)volavka Wrote:  
(03-08-2019, 12:43 PM)tintin2005 Wrote:  Can you please clean this file for me? 

volvo v60 d6 awd plug-in hibrid.

volvo :    P31658440
bosch:    0285013939
             T11801310872 18-01-31
serial:  1 180 13 1087 2939

Thanks in advance!!

Hello Volavka!

I tested your file and after clearing error codes srs module turns to green....
But now i have CEM turned into RED with code B10A200. This one does not go off with VIDA and DICE neither with WIRTH wow.

Can you help??


RE: Volvo v60 crash P31658440 - volavka - 09-09-2019

SRS unit is clear now
Need Clear Crash from CEM as well by launch in special function 
See instruction in attachment   


Good luck V


RE: Volvo v60 crash P31658440 - tintin2005 - 09-09-2019

(09-09-2019, 21:52 PM)volavka Wrote:  SRS unit is clear now
Need Clear Crash from CEM as well by launch in special function 
See instruction in attachment   


Good luck V

Hello volavka.

Thanks for fast answer.

I do not have launch neither do know anyone that has it. ( Reading Step 6 ... fuel pump shut off because of a crash fault... my car´s diesel engine works fine and electric motor works ok too...)


I have cdp+ interface with wow, autocom, delphy  and vida with dice. Is there any chance for me to clear it?
I read in vida to start the car go up to 1500 revs then stop the engine, then start again and keep it at idle speed for 20 seconds....  but no luck.

thanks in andvance


RE: Volvo v60 crash P31658440 - volavka - 09-09-2019

(09-09-2019, 22:33 PM)tintin2005 Wrote:  Hello vovlaka.

Thanks for fast answer.
I do not have launch neither know anyone that has it.
I have cdp+ interface with wow, autocom, delphy  and vida with dice. Is there any chance for me to clear it?
I read in vida to start the car go up to 1500 revs then stop the engine, then start again and keep it at idle speed for 20 seconds....  but no luck.

thanks in andvance

i'm never tried by such tools ,but let try 
Connect CDP+ and send me teamviwer id and pass in PM

Regards


RE: Volvo v60 crash P31658440 - tintin2005 - 09-09-2019

(09-09-2019, 21:52 PM)volavka Wrote:  SRS unit is clear now
Need Clear Crash from CEM as well by launch in special function 
See instruction in attachment   


Good luck V

(09-09-2019, 22:51 PM)volavka Wrote:  
(09-09-2019, 22:33 PM)tintin2005 Wrote:  Hello vovlaka.

Thanks for fast answer.
I do not have launch neither know anyone that has it.
I have cdp+ interface with wow, autocom, delphy  and vida with dice. Is there any chance for me to clear it?
I read in vida to start the car go up to 1500 revs then stop the engine, then start again and keep it at idle speed for 20 seconds....  but no luck.

thanks in andvance

i'm never tried by such tools ,but let try 
Connect CDP+ and send me teamviwer id and pass in PM

Regards

Hello man.  Thank you!

Car is still at the body shop. there´s no wifi there. maybee we can try with mobile phone hotspot...
 
Will this tool do the job?  check the link.txt file attached.

regards from Pt


RE: Volvo v60 crash P31658440 - volavka - 09-09-2019

(09-09-2019, 23:08 PM)tintin2005 Wrote:  Hello man.  Thank you!

Car is still at the body shop. there´s no wifi there. maybee we can try with mobile phone hotspot...
 
Will this tool do the job?  check the link.txt file attached.

regards from Pt

launch easydiag better than this one ,, you will like it in future jobs

Regards


RE: Volvo v60 crash P31658440 - tintin2005 - 12-09-2019

(09-09-2019, 21:52 PM)volavka Wrote:  SRS unit is clear now
Need Clear Crash from CEM as well by launch in special function 
See instruction in attachment   


Good luck V


Hello Man.

I am a hobbist! not a mechanic... if you know what i mean.

If this litle launch in the link.txt does the job for me it is ok.  

Do you know where to buy easydiag for good price/quality?

regards


RE: Volvo v60 crash P31658440 - tintin2005 - 14-09-2019

Hello.

Today i solved the B10A200 CEM Fault with the original tool VIDA and DICE.
It is a very easy procedure.
Remember that this procedure must be taken after SRS module been "Cleaned".

 Just need to go to  Falt detection, then click in Vehicle Comunication. Select CEM and click in General, Restore SRS.
A popup will appear, CEM - Colision Output  State___ Activated. Just click in Restore SRS and popup message will change to CEM - Colision Output  State___ Non Activated.  And that is all.

If i help you just press thanks and  reputation.

regards