+- CarTechnoloGY (https://cartechnology.co.uk)
+-- Forum: All About IMMO/ECU , ChiPTuninG , Dashboard , Locksmith , AirbaG , Carradio (https://cartechnology.co.uk/forumdisplay.php?fid=3)
+--- Forum: IMMO & LOCKSMITH (https://cartechnology.co.uk/forumdisplay.php?fid=9)
+--- Thread: ME2.8 W163 Virginize Or Immo Off (/showthread.php?tid=54655)
ME2.8 W163 Virginize Or Immo Off - Eclipse561 - 06-08-2019
Hey what's up guys I'm hoping you all can help me once again. We have an 02 ML-Class W163 V8 that its ecu failed. Unfortunately the ecu from the vehicle cannot be read by ktag so there goes cloning, I was reading about immo off and I've read that it cannot be done so there's that. My only option is if someone can help me virginize it. I hope someone here can be of any help or can give me any advice, I also have Xentry installed on my computer to code it. That's gonna be another challenge for me since I've just started messing with MB and don't usually take too many of them for work. Thanks once again.
RE: ME2.8 W163 Virginize Or Immo Off - raffy haddad - 06-08-2019
(06-08-2019, 06:05 AM)Eclipse561 Wrote: Hey what's up guys I'm hoping you all can help me once again. We have an 02 ML-Class W163 V8 that its ecu failed. Unfortunately the ecu from the vehicle cannot be read by ktag so there goes cloning, I was reading about immo off and I've read that it cannot be done so there's that. My only option is if someone can help me virginize it. I hope someone here can be of any help or can give me any advice, I also have Xentry installed on my computer to code it. That's gonna be another challenge for me since I've just started messing with MB and don't usually take too many of them for work. Thanks once again.
Here virgin test and report please
What tool di you use to read ?
5p08 eeprom is enough no need for all ecu read
RE: ME2.8 W163 Virginize Or Immo Off - Eclipse561 - 06-08-2019
(06-08-2019, 06:21 AM)raffy haddad Wrote:(06-08-2019, 06:05 AM)Eclipse561 Wrote: Hey what's up guys I'm hoping you all can help me once again. We have an 02 ML-Class W163 V8 that its ecu failed. Unfortunately the ecu from the vehicle cannot be read by ktag so there goes cloning, I was reading about immo off and I've read that it cannot be done so there's that. My only option is if someone can help me virginize it. I hope someone here can be of any help or can give me any advice, I also have Xentry installed on my computer to code it. That's gonna be another challenge for me since I've just started messing with MB and don't usually take too many of them for work. Thanks once again.
Here virgin test and report please
What tool di you use to read ?
5p08 eeprom is enough no need for all ecu read
I read it with ktag. 5p08 is on the front? I only saw one soic-8 there I'm assuming that would be it.