+- CarTechnoloGY (https://cartechnology.co.uk)
+-- Forum: All About IMMO/ECU , ChiPTuninG , Dashboard , Locksmith , AirbaG , Carradio (https://cartechnology.co.uk/forumdisplay.php?fid=3)
+--- Forum: AIRBAG (https://cartechnology.co.uk/forumdisplay.php?fid=13)
+--- Thread: Passat b6 2004 airbag problems (/showthread.php?tid=54942)
Passat b6 2004 airbag problems - naphosim - 12-08-2019
hi,
can someone help to solve the following problem:
the car had an accident, I replaced the airbags and modul airbag computer.
and I have these errors that cannot be erased.
Address 15: Airbags Labels: 6Q0-909-605-VW5.LBL
Control Module Part Number: 1C0 909 605 C
Component and/or Version: 08 AIRBAG VW61 04 0003
Software Coding: 12344
Work Shop Code: WSC 05311
VCID: 244037D2B740BF61A6-5142
11 Faults Found:
00532 - Supply Voltage B+
07-10 - Signal too Low - Intermittent
01227 - Crash Data Stored for Side Airbag; Passenger Side
35-00 - -
00595 - Crash Data Stored
35-00 - -
00588 - Airbag Igniter; Driver Side (N95)
32-10 - Resistance Too High - Intermittent
01218 - Side Airbag Igniter; Passenger Side (N200)
32-10 - Resistance Too High - Intermittent
01589 - Igniter for Head-Airbag; Passenger Side (N252)
32-10 - Resistance Too High - Intermittent
00589 - Airbag Igniter 1; Passenger Side (N131)
32-10 - Resistance Too High - Intermittent
00589 - Airbag Igniter 1; Passenger Side (N131)
33-10 - Resistance Too Low - Intermittent
01217 - Side Airbag Igniter; Driver Side (N199)
32-10 - Resistance Too High - Intermittent
00588 - Airbag Igniter; Driver Side (N95)
33-10 - Resistance Too Low - Intermittent
01647 - Head-Airbag; Pass. Side; Disabled
35-00 - -
RE: Passat b6 2004 airbag problems - nek13 - 12-08-2019
Try erase crash data..
RE: Passat b6 2004 airbag problems - naphosim - 12-08-2019
(12-08-2019, 08:13 AM)nek13 Wrote: Try erase crash data..
How? I have a VCDS v17 interface
RE: Passat b6 2004 airbag problems - volavka - 12-08-2019
The airbag ecu you've installed already crashed
try read mcu hc91d60 from original ECU and post dump here
xprog, upa, vvdi ..etc can read , 4 wires needed for read (5v , gnd, bkgd, reset)
Regards
RE: Passat b6 2004 airbag problems - naphosim - 13-08-2019
(12-08-2019, 14:21 PM)volavka Wrote: The airbag ecu you've installed already crashed
try read mcu hc91d60 from original ECU and post dump here
xprog, upa, vvdi ..etc can read , 4 wires needed for read (5v , gnd, bkgd, reset)
Regards
thanks for the answer, i will try to replace it with another ECU, it's much easier for me.
RE: Passat b6 2004 airbag problems - Hansi72 - 15-08-2019
passat b6 you can delete the crash data 2 or 3 times via odis. I'm not sure about vcds
when my controller was defective, I saw the possibility in odis