+- CarTechnoloGY (https://cartechnology.co.uk)
+-- Forum: All About IMMO/ECU , ChiPTuninG , Dashboard , Locksmith , AirbaG , Carradio (https://cartechnology.co.uk/forumdisplay.php?fid=3)
+--- Forum: IMMO & LOCKSMITH (https://cartechnology.co.uk/forumdisplay.php?fid=9)
+--- Thread: Golf VI 2012 PCR2.1 (/showthread.php?tid=55065)
Golf VI 2012 PCR2.1 - svukov21 - 14-08-2019
Hello!
I have here Golf VI 1.6TDI PCR2.1 year 2012 with broken engine ECU(water damaged). I can not read original ECU there is no communication with it.
I have found used same ECU like original one and I have read original MAC, CS and PIN from car (from odometer) but I have no tool to adapt new/used ECU.
My question is: Is somebody able to adapt used ECU trough VAG online coding (if that is possible) or have any solution how to start this car?
Also if I put Julie immo emulator what MAC and CS I need to write (from car or from donor ECU)?
Thanks in advance
Best regards
RE: Golf VI 2012 PCR2.1 - ROD-BENDERS - 14-08-2019
(14-08-2019, 20:20 PM)svukov21 Wrote: Hello!
I have here Golf VI 1.6TDI PCR2.1 year 2012 with broken engine ECU(water damaged). I can not read original ECU there is no communication with it.
I have found used same ECU like original one and I have read original MAC, CS and PIN from car (from odometer) but I have no tool to adapt new/used ECU.
My question is: Is somebody able to adapt used ECU trough VAG online coding (if that is possible) or have any solution how to start this car?
Also if I put Julie immo emulator what MAC and CS I need to write (from car or from donor ECU)?
Thanks in advance
Best regards
If you use julie emulator the instructions are online should be relatively straight forward
RE: Golf VI 2012 PCR2.1 - Senario - 15-08-2019
(14-08-2019, 20:20 PM)svukov21 Wrote: Hello!
I have here Golf VI 1.6TDI PCR2.1 year 2012 with broken engine ECU(water damaged). I can not read original ECU there is no communication with it.
I have found used same ECU like original one and I have read original MAC, CS and PIN from car (from odometer) but I have no tool to adapt new/used ECU.
My question is: Is somebody able to adapt used ECU trough VAG online coding (if that is possible) or have any solution how to start this car?
Also if I put Julie immo emulator what MAC and CS I need to write (from car or from donor ECU)?
Thanks in advance
Best regards
it is possible mate, you just need to have odis and the same part number ecu , we can do it online coding for you.
