ISTA/D ABL:Charging pressure control deviation - Printable Version +- CarTechnoloGY (https://cartechnology.co.uk) +-- Forum: Discussions All about Software and Hardware (https://cartechnology.co.uk/forumdisplay.php?fid=310) +--- Forum: Automotive Help & Discussions / Software and Hardware (https://cartechnology.co.uk/forumdisplay.php?fid=40) +---- Forum: BMW - Mini - Rolls Royce (https://cartechnology.co.uk/forumdisplay.php?fid=61) +---- Thread: ISTA/D ABL:Charging pressure control deviation (/showthread.php?tid=55095) |
ISTA/D ABL:Charging pressure control deviation - Lsc - 15-08-2019 When I try to execute: ABL Charging pressure control deviation in ISTA/D, to check for a boost leak, ISTA doesn´t seem to give me the option to perform the check anyway, even if there are no fault codes stored. Is there another way to check for a boost leak with ISTA? Or a workaround? (Vehicle is E71 XDrive40dx with N57 twin turbo engine) RE: ISTA/D ABL:Charging pressure control deviation - willisodhiambo - 16-08-2019 Create an error by advertently causing a boost leak!! Then run test plan on the error. Once ABL starts, before the first test, restore charge pipe if that is how you decide to cause a fault. |