+- CarTechnoloGY (https://cartechnology.co.uk)
+-- Forum: Discussions All about Software and Hardware (https://cartechnology.co.uk/forumdisplay.php?fid=310)
+--- Forum: Automotive Help & Discussions / Software and Hardware (https://cartechnology.co.uk/forumdisplay.php?fid=40)
+---- Forum: BMW - Mini - Rolls Royce (https://cartechnology.co.uk/forumdisplay.php?fid=61)
+---- Thread: ENTRYNAV 2 Repair Kit “ component protection active !! HELP (/showthread.php?tid=55463)
ENTRYNAV 2 Repair Kit “ component protection active !! HELP - MAXGENIO - 23-08-2019
I have a big problem with the ENTRYNAV 2 installed to MINI F60, I can't add the FSC the unit it is locked ( component protection active ) to ISTA D
this unit was installed in another car but all the old FSC has been deleted by tool32 and I flashed with the last psdzdata
Maye I need the FSC 170 02 to unlock , if anyone could help me to have this file included on the pack repair
this is My VIN WMWYY31040 3G49276
I seem can use any FSC 170 entrynav not necessarily produced on my VIN
I have all the FSC OEM of my car but without the 170
Please help me thanks a lot
Massimiliano
RE: ENTRYNAV 2 Repair Kit “ component protection active !! HELP - Thorsten - 24-08-2019
Hi,
BMW isn’t selling the 170 FSC, perhaps time to drive to your local dealer to request a PUMA case or anything else.
Thorsten
RE: ENTRYNAV 2 Repair Kit “ component protection active !! HELP - MAXGENIO - 24-08-2019
Thanks for the reply but, I can go to Bmw to ask this issue
This unit is not original of my car was to different car before
I need someone to have this file already received , I can pay for all this
Pleas help me
RE: ENTRYNAV 2 Repair Kit “ component protection active !! HELP - Thorsten - 24-08-2019
Hi,
But you got the FSC from BMW, or?
There is. I faked solution available and the component protection with this headunit is new to me, to see it,
It seems, that it is new to others, too.
Thorsten
RE: ENTRYNAV 2 Repair Kit “ component protection active !! HELP - MAXGENIO - 25-08-2019
You got the original fsc of my car but without the 170 02 , I would just have this file even from in the other car you do not need to match my VIN. If someone has this repair package available it would be the solution
RE: ENTRYNAV 2 Repair Kit “ component protection active !! HELP - mjuhl2003 - 25-08-2019
you need to goto BMW and document that you have bought this unit legitimately. Then bmw can req. to code to unlock the unit.
It has nothig to do with fsc codes. Read the Release notes to ista+
RE: ENTRYNAV 2 Repair Kit “ component protection active !! HELP - Fx82 - 25-08-2019
Told him that a couple of times.
RE: ENTRYNAV 2 Repair Kit “ component protection active !! HELP - Thorsten - 25-08-2019
(25-08-2019, 08:46 AM)mjuhl2003 Wrote: you need to goto BMW and document that you have bought this unit legitimately. Then bmw can req. to code to unlock the unit.
It has nothig to do with fsc codes. Read the Release notes to ista+
...so it isn’t possible to retrofit such an used entryevo headunit about missing skills to viriginize such a headunit?
Thorsten
RE: ENTRYNAV 2 Repair Kit “ component protection active !! HELP - mjuhl2003 - 25-08-2019
If you know someone at bmw they might be able to send you the code based/calculated form the input you give via ISTA.
RE: ENTRYNAV 2 Repair Kit “ component protection active !! HELP - duckdonald - 25-08-2019
(25-08-2019, 15:17 PM)Thorsten Wrote:(25-08-2019, 08:46 AM)mjuhl2003 Wrote: you need to goto BMW and document that you have bought this unit legitimately. Then bmw can req. to code to unlock the unit.
It has nothig to do with fsc codes. Read the Release notes to ista+
...so it isn’t possible to retrofit such an used entryevo headunit about missing skills to viriginize such a headunit?
Thorsten
it is possible to install a used unit, .. but it must first be virginized, and then installed.
if it is installed without virginizing it, .. you risk is component protection active, if you are not very practical in the installation.
now it must request the unlock code in bmw.