Open Astra G 1.4 Z14XEP ECU replacement clear - Printable Version +- CarTechnoloGY (https://cartechnology.co.uk) +-- Forum: All About IMMO/ECU , ChiPTuninG , Dashboard , Locksmith , AirbaG , Carradio (https://cartechnology.co.uk/forumdisplay.php?fid=3) +--- Forum: IMMO & LOCKSMITH (https://cartechnology.co.uk/forumdisplay.php?fid=9) +--- Thread: Open Astra G 1.4 Z14XEP ECU replacement clear (/showthread.php?tid=55719) Pages:
1
2
|
Open Astra G 1.4 Z14XEP ECU replacement clear - fold - 29-08-2019 I've got faulty Bosch ECU part no 0261208669 YX Is it interchangable with ECUsĀ that have different letters coding ? There are plenty of units from different opel model. Which tool do i need to clear used part. Can i clear used ECU with opcom RE: Open Astra G 1.4 Z14XEP ECU replacement clear - rightpcb - 29-08-2019 mount new / used ECU and extract pin with carprog RE: Open Astra G 1.4 Z14XEP ECU replacement clear - Foxsitto - 29-08-2019 Hey. Yes, you can reset the ecu with opcom but to do this, you must have a security code. Help you here Carprog or FVDI. RE: Open Astra G 1.4 Z14XEP ECU replacement clear - fold - 30-08-2019 As i remember opcom can retreive security code from old ECUs like this one, this is KWP protocol not CAN. Am i right ? Could someone confirm is this ECU interchangable with other models ? Part number 0261208669 YX is quite rare. RE: Open Astra G 1.4 Z14XEP ECU replacement clear - marcinek209 - 30-08-2019 This ecu is me7.6.1- z10xep/z12xep/z14xep with this car : Corsa C/Meriva A. You must reprogramming software (SPS) under VIN. RE: Open Astra G 1.4 Z14XEP ECU replacement clear - fold - 08-09-2019 i've tried to read pin with carprog but it's wrong 65FD any ideas? RE: Open Astra G 1.4 Z14XEP ECU replacement clear - snyper - 18-09-2019 do you have fvdi? RE: Open Astra G 1.4 Z14XEP ECU replacement clear - fold - 19-09-2019 (18-09-2019, 18:06 PM)snyper Wrote: do you have fvdi? no, i don't i'll try today with galletto note: this is older ECU, it runs over K-line, not CAN RE: Open Astra G 1.4 Z14XEP ECU replacement clear - peetie43 - 20-09-2019 (19-09-2019, 06:51 AM)fold Wrote: [quote="snyper" pid='482459' dateline='1568829988'] no, i don't i'll try today with galletto note: this is older ECU, it runs over K-line, not CAN With Carprog please see the pic and connect ground to ECU body also ( PIN 2 IS GREEN WIRE) RE: Open Astra G 1.4 Z14XEP ECU replacement clear - fold - 20-09-2019 (20-09-2019, 05:52 AM)peetie43 Wrote:(19-09-2019, 06:51 AM)fold Wrote: [quote="snyper" pid='482459' dateline='1568829988'] I've connected same as in the picture, except PIN 5. I took gnd ONLY from body, i thought that's enough? |