SLI with adapter in F10 with NBT EVO not working - Printable Version +- CarTechnoloGY (https://cartechnology.co.uk) +-- Forum: Discussions All about Software and Hardware (https://cartechnology.co.uk/forumdisplay.php?fid=310) +--- Forum: Automotive Help & Discussions / Software and Hardware (https://cartechnology.co.uk/forumdisplay.php?fid=40) +---- Forum: BMW - Mini - Rolls Royce (https://cartechnology.co.uk/forumdisplay.php?fid=61) +---- Thread: SLI with adapter in F10 with NBT EVO not working (/showthread.php?tid=55839) |
SLI with adapter in F10 with NBT EVO not working - thstorm - 01-09-2019 Hi, i need help getting my SLI working. I have an F10 from 12/2011 (DV06058) with an retrofitted NBT EVO ID6 The retrofitting was done without emulator, ZGW was changed to 8SK. Since i have KAFAS1 my SLI has displayed "---". Now i ordered the SLI activator form carsystems. Attached the adapter shown on the picture. Now the SLI is still not working, and my Lane departure is also not working. I get the error "camera based assistance not working". Does anybody know if there is any coding required or where my fault is? RE: SLI with adapter in F10 with NBT EVO not working - elettronick - 21-03-2023 hi , i have similar issue, car is f10 pre lci, i have install evo with emulator custom retrofit. now i have retrofit also kit ori kafas1 , but i not have sign on kombi, no error on kafas, and camera is correct calibrated. RE: SLI with adapter in F10 with NBT EVO not working - user_530d - 21-03-2023 SLI with NBT EVO need signal from KAFAS2. |