+- CarTechnoloGY (https://cartechnology.co.uk)
+-- Forum: All About IMMO/ECU , ChiPTuninG , Dashboard , Locksmith , AirbaG , Carradio (https://cartechnology.co.uk/forumdisplay.php?fid=3)
+--- Forum: CHIPTUNING (https://cartechnology.co.uk/forumdisplay.php?fid=12)
+--- Thread: Kess and ktag edc17 (/showthread.php?tid=55887)
Kess and ktag edc17 - pieboy555 - 02-09-2019
Hi all,i wanted to ask a question
I used k tag for reading my golf 7 and read just eprom(maps)
Now i want to write the mod file,Can I write with kess or i need to open ecu again.its my first time using k tag
RE: Kess and ktag edc17 - David89 - 02-09-2019
If you want write your mod file by ktag you must open ecu and connect it on tabble, but if you want write your mod file by kess obd, you must have vr file for your ecu, mod it and write by obd with kess.
RE: Kess and ktag edc17 - pieboy555 - 02-09-2019
(02-09-2019, 19:20 PM)David89 Wrote: If you want write your mod file by ktag you must open ecu and connect it on tabble, but if you want write your mod file by kess obd, you must have vr file for your ecu, mod it and write by obd with kess.
I just read one of memories where the maps are and somebody modified that can i write with kess now
RE: Kess and ktag edc17 - lucaslacerda - 02-09-2019
(02-09-2019, 20:39 PM)pieboy555 Wrote:(02-09-2019, 19:20 PM)David89 Wrote: If you want write your mod file by ktag you must open ecu and connect it on tabble, but if you want write your mod file by kess obd, you must have vr file for your ecu, mod it and write by obd with kess.
I just read one of memories where the maps are and somebody modified that can i write with kess now
Yes, you can...
Just pick your MOD file, then, open this on Kess (Maps place) and choose wirte.
If anything is wrong, the Ksuite will say to you before write (for exemple: wrong checkssum).
Good luck
RE: Kess and ktag edc17 - 8baller - 03-09-2019
but it took how long to do the map? you could not wait to just use same tool to write back?
RE: Kess and ktag edc17 - Dolcevita - 07-09-2019
U need vr protocol
If need help pn ...