Cla Does not start after crash. - Printable Version +- CarTechnoloGY (https://cartechnology.co.uk) +-- Forum: Discussions All about Software and Hardware (https://cartechnology.co.uk/forumdisplay.php?fid=310) +--- Forum: Automotive Help & Discussions / Software and Hardware (https://cartechnology.co.uk/forumdisplay.php?fid=40) +---- Forum: Mercedes Benz - Smart (https://cartechnology.co.uk/forumdisplay.php?fid=63) +---- Thread: Cla Does not start after crash. (/showthread.php?tid=55942) |
Cla Does not start after crash. - tommy4u - 04-09-2019 [attachment=104335]Hi everybody I have a mercedes CLA 180 which a minor crash and a dtc B220700 was stored in srs ecu. it could not cleared so finally we replaced the module and did the adaptations. dtc gone. The car does not start. We checked fuel , ignition, battery etc. There is this value in MED40 module Inhibit engine after crash event : Inactive and the specified value : Active I am told that this value should be active for the car to start. We did online update and scn coding etc for med40 but this does not change and the car still does not start. We have checked both Fuse boxes. Checked Prefuse Box. Check starter battery and normal battery. Checked the injector coils, checked the turbocharger. Car not starting your help will very much appreciated Thanking you in advance RE: Cla Does not start after crash. - MOMOSAM - 04-09-2019 The car in the picture is not a CLA!!! RE: Cla Does not start after crash. - Yoshimura - 04-09-2019 Is the screenshot from your car? I do not think so - MED177 with OM278 is different car. What faults do you have in your ECU? Check in actual values is SAM the voltage levels. Or better post complete quick test of the car. BR RE: Cla Does not start after crash. - tommy4u - 04-09-2019 Sorry Guys. I had uploaded the Wrong picture by mistake . The car is a CLA 180 W117 Model RE: Cla Does not start after crash. - ryanb - 04-09-2019 I believe you have to replace or repair the fuse block. do not remember the name off the top of head but it will pop a fuse and unable to start car after RE: Cla Does not start after crash. - tommy4u - 04-09-2019 (04-09-2019, 17:31 PM)ryanb Wrote: I believe you have to replace or repair the fuse block. do not remember the name off the top of head but it will pop a fuse and unable to start car after will check the pyrofuse box RE: Cla Does not start after crash. - tommy4u - 05-09-2019 Checked Pyrofuses. All ok. Check other fuses. The car has power. There is spark and also fuel is coming when we turn the key. But not starting RE: Cla Does not start after crash. - myztic - 06-09-2019 because crash event stored in med40 ecu RE: Cla Does not start after crash. - Siner18509 - 06-09-2019 pls check SCN coding & update software N3/10 first! RE: Cla Does not start after crash. - myztic - 06-09-2019 no need to do anything online! Just reset crash event inside med40 ecu using xentry or vediamo/monaco. |