BMW e61 530d 170kw stage 2 - Printable Version +- CarTechnoloGY (https://cartechnology.co.uk) +-- Forum: All About IMMO/ECU , ChiPTuninG , Dashboard , Locksmith , AirbaG , Carradio (https://cartechnology.co.uk/forumdisplay.php?fid=3) +--- Forum: CHIPTUNING (https://cartechnology.co.uk/forumdisplay.php?fid=12) +--- Thread: BMW e61 530d 170kw stage 2 (/showthread.php?tid=55983)

BMW e61 530d 170kw stage 2 - Tomate - 05-09-2019 BMW_STAGE_2.rar File Type: Downloaded: 5 times Size: 370.05 KB hello, i need some help from you experts! could somebody please check my stage 2 file? it is for my own car. my hardware modifications are dpf off (downpipe), big intercooler, optimized air-intake mainfold and railpressure sensor up to 2000bar. i drove long time a stage 1, step by step i made rail and turbo pressure higher, drove over 150.000km with my files without problems but how you all knew there is never enough power. with my last file i had error code  P3004 (rail pressure to high..) while driving maximum load for longer time. that is first time i have an error code with my own files. now i had made a new file and it would be realy nice if somebody could have a look at it and help me with it if it is not ok. RE: BMW e61 530d 170kw stage 2 - loki954 - 05-09-2019 you should post always the original file as well RE: BMW e61 530d 170kw stage 2 - Tomate - 05-09-2019 BMW e61 530d original file.rar File Type: Downloaded: 4 times Size: 370.4 KB ok! that is the original file. read with kess clone and rework with ecm. RE: BMW e61 530d 170kw stage 2 - loki954 - 05-09-2019 driver wish missed,fuel quantity limiter missed,fuel injected missed, torque limiter missed, egr not closed RE: BMW e61 530d 170kw stage 2 - Tomate - 05-09-2019 Thank you for your answer! Did i use wrong driver? or do i have to supply my driver? i`m not sure how to see these limiters and these fields.. or is it defective data? is egr closed completly with the largest nummerical value? somehow the value 12000 haunts my head, but I'm not sure. I hope I do not bother with my beginner questions Regards RE: BMW e61 530d 170kw stage 2 - loki954 - 05-09-2019 You should close egr by hysteresis. Use winols or if you have original ecm should find the missing things RE: BMW e61 530d 170kw stage 2 - Tomate - 05-09-2019 I already tried to work with winols a few times, but so far without success. just did not get it right ... But I think you're right and I'll start a new attempt immediately. Thanks