ICOMP, ICOM Next Connection problem with ISTA - Printable Version +- CarTechnoloGY (https://cartechnology.co.uk) +-- Forum: Discussions All about Software and Hardware (https://cartechnology.co.uk/forumdisplay.php?fid=310) +--- Forum: Automotive Help & Discussions / Software and Hardware (https://cartechnology.co.uk/forumdisplay.php?fid=40) +---- Forum: BMW - Mini - Rolls Royce (https://cartechnology.co.uk/forumdisplay.php?fid=61) +---- Thread: ICOMP, ICOM Next Connection problem with ISTA (/showthread.php?tid=56072) |
RE: ICOMP, ICOM Next Connection problem with ISTA - inspi1981 - 08-10-2019 Dealer use ICOM Next RE: ICOMP, ICOM Next Connection problem with ISTA - PsevDo - 08-10-2019 i have the same problem with oem icom next, when i configure static ip for it, itool radar cant find it, tried several times to do static ip, but problem was same, i recovered factory settings with usb stick to icom, now i using dinamic ip, i have 3 different ip on lan cable and 2 ip on wirelles connection RE: ICOMP, ICOM Next Connection problem with ISTA - Vojno - 09-10-2019 If you use static IP on ICOM then write in this IP under %\ITool Radar\config\ip-configuration.txt !!! |