Bsi valeo with upd mcu - Printable Version

Bsi valeo with upd mcu - Printable Version

+- CarTechnoloGY (https://cartechnology.co.uk)
+-- Forum: All About IMMO/ECU , ChiPTuninG , Dashboard , Locksmith , AirbaG , Carradio (https://cartechnology.co.uk/forumdisplay.php?fid=3)
+--- Forum: IMMO & LOCKSMITH (https://cartechnology.co.uk/forumdisplay.php?fid=9)
+--- Thread: Bsi valeo with upd mcu (/showthread.php?tid=56075)

Pages: 1 2

Bsi valeo with upd mcu - raffy haddad - 06-09-2019

Hello all
Any one can share upa-s pin out to read this bsi valeo with nec mcu ?
In upa shema there is pinout but directly to mcu
Any other easy conection to read ?
Thanks in advance

RE: Bsi valeo with upd mcu - dabaca - 06-09-2019

(06-09-2019, 18:55 PM)raffy haddad Wrote:

nec.rar

File Type:

Downloaded: 44 times

Size: 841.98 KB

Hello all
Any one can share upa-s pin out to read this bsi valeo with nec mcu ?
In upa shema there is pinout but directly to mcu
Any other easy conection to read ?
Thanks in advance

if that helps https://www.youtube.com/watch?v=dGt6heIgGYI

RE: Bsi valeo with upd mcu - Abou-raffik - 06-09-2019

every time dabaca 100% solution thankyou brr

RE: Bsi valeo with upd mcu - volavka - 06-09-2019

78k0 adapter mandatory to read that CPU

Cheers

.

RE: Bsi valeo with upd mcu - raffy haddad - 07-09-2019

I have that adapter but chinese and reworked as a member here post this solution

RE: Bsi valeo with upd mcu - raffy haddad - 07-09-2019

Hello guys
Thanks for all replied my request
The problem is error on read
Test pins all ok Maybe bad clone adaptor
I had to quit the job

RE: Bsi valeo with upd mcu - Abou-raffik - 07-09-2019

bad adaptor give error reading

RE: Bsi valeo with upd mcu - raffy haddad - 09-09-2019

Hello all tring to obtain pin code from ecu not succeed
Can any one try ?
Thanks in advance
Ecu s2000 eeprom 95080

RE: Bsi valeo with upd mcu - Abou-raffik - 09-09-2019

hi raffy

it's not difficult in s2000!!!
what tool u using to reading pls .
me too i cant calculate pin!!!!

RE: Bsi valeo with upd mcu - zmann - 09-09-2019

(09-09-2019, 13:42 PM)raffy haddad Wrote: Hello all tring to obtain pin code from ecu not succeed
Can any one try ?
Thanks in advance
Ecu s2000 eeprom 95080

Hello, The ECU eep looks like it's in virgin state (contain strings of 11 11 11 11 at PIN locations, so no PIN) but you can check the ECU status by...ECU> parameter.

edit: Ok if you'd like to try again the BSI, here is my pinout...
- none of MCU pins are lifted or directly connected
- lift a pin of the nearby IC marked "this pin may be lifted"
- there could be two types of HW, at connection "9" if the R is 0 then removed the R. But if it's 472 as in the image you can leave it like that. Good luck!