+- CarTechnoloGY (https://cartechnology.co.uk)
+-- Forum: All About IMMO/ECU , ChiPTuninG , Dashboard , Locksmith , AirbaG , Carradio (https://cartechnology.co.uk/forumdisplay.php?fid=3)
+--- Forum: IMMO & LOCKSMITH (https://cartechnology.co.uk/forumdisplay.php?fid=9)
+--- Thread: Solved ✔ Immo off ME7.4.4 Peugeot 206, help please. (/showthread.php?tid=56135)
Immo off ME7.4.4 Peugeot 206, help please. - Yhoni - 08-09-2019
Hello friends, can anyone help me to remove the immobilizer from these files extracted to a Bosch ECU 0 261 208 101 ME7.4.4 from a Peugeot 206 1.6 16v?
Or tell me what tool should I use to remove the immobilizer?
Thank you very much
RE: Immo off ME7.4.4 Peugeot 206, help please. - Abou-raffik - 08-09-2019
i dont see your thread look here post #13
https://cartechnology.co.uk/showthread.php?tid=51041&page=2
RE: Immo off ME7.4.4 Peugeot 206, help please. - migmig85 - 08-09-2019
Check this solution and give report.
Pass in PM.
RE: Immo off ME7.4.4 Peugeot 206, help please. - Yhoni - 10-09-2019
(08-09-2019, 19:13 PM)migmig85 Wrote: Check this solution and give report.
Pass in PM.
Thanks migmig85 but the car does not start with any combination of your files.
Do you know any program that I can use to remove the immobilizer from the original files?
Thanks for sharing.
RE: Immo off ME7.4.4 Peugeot 206, help please. - Abou-raffik - 10-09-2019
hi brother with all this good and tested solution and not working for you ....REALY STRANGE.
i think you have another problem bad chips or ecu i dont know .
sorry brr i make stop for this thread maybe somone will give you solution that i havnt.
RE: Immo off ME7.4.4 Peugeot 206, help please. - bbiird - 10-09-2019
look here
Psa bosch 7.4.4 immo off
https://cartechnology.co.uk/showthread.php?tid=55904
RE: Immo off ME7.4.4 Peugeot 206, help please. - Yhoni - 11-09-2019
(10-09-2019, 13:34 PM)BOULEFAA Wrote: hi brother with all this good and tested solution and not working for you ....REALY STRANGE.
i think you have another problem bad chips or ecu i dont know .
sorry brr i make stop for this thread maybe somone will give you solution that i havnt.
Hello Boulefaa, I also came to think that something was happening after having programmed the flash memory and the eeprom up to 6 times with the different files shared by colleagues in the forum and without starting the car but today I recorded the files shared by the partner from another forum and the car has started without problem.
In this way I can take the problem for granted but I am not aware of the difference between the files shared here and the file shared by "mnem".
Could you tell me what program you use to clear the immobilizers of the ECU?
Thank you.
(10-09-2019, 20:26 PM)bbiird Wrote: look here
Psa bosch 7.4.4 immo off
https://cartechnology.co.uk/showthread.php?tid=55904
Hi bbiird, I already solved the problem with some files shared on other forum
Thank you very much anyway for sharing your files too.