+- CarTechnoloGY (https://cartechnology.co.uk)
+-- Forum: Discussions All about Software and Hardware (https://cartechnology.co.uk/forumdisplay.php?fid=310)
+--- Forum: Automotive Help & Discussions / Software and Hardware (https://cartechnology.co.uk/forumdisplay.php?fid=40)
+---- Forum: BMW - Mini - Rolls Royce (https://cartechnology.co.uk/forumdisplay.php?fid=61)
+---- Thread: BMW X5xdrive40e (/showthread.php?tid=56175)
BMW X5xdrive40e - bjorrieken - 09-09-2019
Hi guys,
I had to swap a faulty SME in an X5 xdrive40e.
Did the programming, and transferred battery values from the old SME.
However, now i need a 12 digit code from the EOS tester to be able to 'activate' the HV contacts of the SME.
This could should be stored in the old SME. Anybody know if i can read this with TOOL32 ?
Thanks,
Bjorn
RE: BMW X5xdrive40e - Patrick11021979 - 09-09-2019
Eos test generates the code after a succesfull test... So think you need to do that.. And then put in code through Ista/d...
RE: BMW X5xdrive40e - oceandiver86 - 09-09-2019
Yes exactly EOS test/ code is needed after battery pack was opened.
RE: BMW X5xdrive40e - bjorrieken - 10-09-2019
Thanks for the feedback guys.
Since i don't own a EOS tester, i'm gonna head off to the dealer.
Thanks,