+- CarTechnoloGY (https://cartechnology.co.uk)
+-- Forum: Discussions All about Software and Hardware (https://cartechnology.co.uk/forumdisplay.php?fid=310)
+--- Forum: Automotive Help & Discussions / Software and Hardware (https://cartechnology.co.uk/forumdisplay.php?fid=40)
+---- Forum: BMW - Mini - Rolls Royce (https://cartechnology.co.uk/forumdisplay.php?fid=61)
+---- Thread: Solved ✔ CIC FSC activating problems, sig check fails (/showthread.php?tid=56263)
CIC FSC activating problems, sig check fails - Freddy1 - 10-09-2019
I´m trying to activate a customer CIC (used) with FSC with intels and DarkSys method, but both doesn´t work, I´ve tried to delete data01-03 and generalPersistencyData_DiagnosticSWTController via FTP, but even after that I can´t check the sig.der. I´ve also tried to flash it, with didn´t get the result...
Is there a way to remove all what has been done from others? Because I don´t know if it has been activated before..
RE: CIC FSC activating problems, sig check fails - duckdonald - 10-09-2019
Winkfp:
configuration
use force programming program in comfort mode or program in exper mode
RE: CIC FSC activating problems, sig check fails - cst1077 - 10-09-2019
(10-09-2019, 20:29 PM)duckdonald Wrote: Winkfp:
configuration
use force programming program in comfort mode or program in exper mode
i tried to import fsc custom to evo headunit. I got swid_check_failure.
Is that same solution?
Thanks a lot.
RE: CIC FSC activating problems, sig check fails - duckdonald - 11-09-2019
You triggered the component block.
if you can run the bin file from usb, .. you can resolve
RE: CIC FSC activating problems, sig check fails - Freddy1 - 11-09-2019
(10-09-2019, 20:29 PM)duckdonald Wrote: Winkfp:
configuration
use force programming program in comfort mode or program in exper mode
I did flash it in expert mode, but the problem still exists
RE: CIC FSC activating problems, sig check fails - duckdonald - 11-09-2019
set active ->force programming program in comfort mode
RE: CIC FSC activating problems, sig check fails - cursor - 11-09-2019
I mount used CIC, a make this with this method:
https://cartechnology.co.uk/showthread.php?tid=54721&pid=472925#pid472925
Work good
RE: CIC FSC activating problems, sig check fails - Freddy1 - 11-09-2019
Thanks for your help, I got it working after flashing it 4x (2x with comfort mode and programming forced and 2x in expert mode), now he is finally accepting the sig check
RE: CIC FSC activating problems, sig check fails - HU_man - 13-09-2019
G
(11-09-2019, 09:14 AM)Freddy1 Wrote:Flash with target vin, not evo vin.(10-09-2019, 20:29 PM)duckdonald Wrote: Winkfp:
configuration
use force programming program in comfort mode or program in exper mode
I did flash it in expert mode, but the problem still exists
RE: CIC FSC activating problems, sig check fails - Freddy1 - 14-09-2019
As I said, I got it working, and it was a CIC, not an EVO