+- CarTechnoloGY (https://cartechnology.co.uk)
+-- Forum: All About IMMO/ECU , ChiPTuninG , Dashboard , Locksmith , AirbaG , Carradio (https://cartechnology.co.uk/forumdisplay.php?fid=3)
+--- Forum: AIRBAG (https://cartechnology.co.uk/forumdisplay.php?fid=13)
+--- Thread: Ford S-max Need RCM dump (/showthread.php?tid=56313)
Ford S-max Need RCM dump - Thinkpad - 12-09-2019
Hi,
I am looking for eeprom dump on Ford RCM module. Original fault was only B1193, crash data stored. Ori eeprom was somehow lost, data corrupted. I tried a lot of dumps from same HW and still no luck. Also tried it configuring module with IDS, after that I read eeprom again and see changes, also VIN gets changed but cannot make it work.
There are faults in ABS and RCM with eeprom from exact same HW unit after programming it with IDS:
ABS:
-U0452 invalid data received from SRS
-C0062 longitudinal acceleration sensor
RCM
-B1193 crash event storage
-U3000:49 internal module fault
-C0063 yaw rate sensor
Is it possible that eeprom is somehow tied to MCU? Why ABS is ON, longitudinal sensor is ABG? I checked PCB, there are no damages, car was involved in minor accident, rear wheel was hit from side and curtain deployed.
Here is how module look like:
https://www.cardumps.com/unit/show/ford/edge/airbag/file/39741
Anyone registered here and can make purchase for me?
Car: Ford S-max 2016
Bosch: 0285013766
FORD: E1GT 14B321 BE
Memory: 95640
Best regards
RE: Ford S-max Need RCM dump - al70 - 26-01-2022
Ive cleared the crash from dump above if you want to try