+- CarTechnoloGY (https://cartechnology.co.uk)
+-- Forum: All About IMMO/ECU , ChiPTuninG , Dashboard , Locksmith , AirbaG , Carradio (https://cartechnology.co.uk/forumdisplay.php?fid=3)
+--- Forum: AIRBAG (https://cartechnology.co.uk/forumdisplay.php?fid=13)
+--- Thread: Solved ✔ Crash 68233535AC Chrysler Town and Country 2016 (/showthread.php?tid=56348)
Crash 68233535AC Chrysler Town and Country 2016 - filu02 - 12-09-2019
Hello members
Today i have Chrysler Town and Country 2016
The car is rare in Europe so i have a problem.
There is a Airbag module 68233535AC with SPC560P50
I have in this moment fault B2204 ECU Configuration Mismatch but in measure value i see the info the unit is locked after accident.
So anybody can clear this crash or unlock the unit?
I enclose the dflash read with VVDI prog.
RE: Crash 68233535AC Chrysler Town and Country 2016 - volavka - 12-09-2019
give a try this solution !
Pass in PM
RE: Crash 68233535AC Chrysler Town and Country 2016 - filu02 - 12-09-2019
Don`t work
the same fault
B2204
and
B222A line mismatch
and in the measure still i see locked and the ecu don`t show the resistance of the airabgs
RE: Crash 68233535AC Chrysler Town and Country 2016 - filu02 - 23-09-2019
(12-09-2019, 17:26 PM)filu02 Wrote: Don`t work
the same fault
B2204
and
B222A line mismatch
and in the measure still i see locked and the ecu don`t show the resistance of the airabgs
I test another file from other source and is totally different solution but still have two fault.
This situation assured me that the problem lies elsewhere.
The problem was a badly encoded gateway !!!
Problem solved.
PS.
I think that in these airbag controllers only the error is deleted by a simple tester.
No need to clear carsh data