+- CarTechnoloGY (https://cartechnology.co.uk)
+-- Forum: Discussions All about Software and Hardware (https://cartechnology.co.uk/forumdisplay.php?fid=310)
+--- Forum: Automotive Help & Discussions / Software and Hardware (https://cartechnology.co.uk/forumdisplay.php?fid=40)
+---- Forum: BMW - Mini - Rolls Royce (https://cartechnology.co.uk/forumdisplay.php?fid=61)
+---- Thread: ISTA-P Help for a newbie (/showthread.php?tid=56478)
Pages:
1
2
ISTA-P Help for a newbie - focist170 - 15-09-2019
Hi,
First post from a newbie.
I was updating the software on my dads r56 Mini Cooper s.
I wasn’t watching and my laptop went into sleep mode! (Stupid error I know)
It was halfway through programming the BO module. Now it’s bricked so the radio etc isn’t working.
I’ve read that their is a way to recover this situation. I’m only new to this and I’ve joined the forum to ask for help because I’m struggling.
Can anyone help me?
Thanks in advance
Stephen
RE: ISTA-P Help for a boo Jr! - Arg0N - 15-09-2019
Hey,
Did you try default coding module with ncs?
RE: ISTA-P Help for a newbie - Enabled - 15-09-2019
What tool are you using?
RE: ISTA-P Help for a newbie - ____ANGEL___ - 15-09-2019
Yes you can try to recover it with icom preferably most connection but also dcan will work... if ista p fail try to recover in nfs emergency mode.
RE: ISTA-P Help for a newbie - Node - 15-09-2019
Have you tried to start new session with ISTA-P and see if it detects aborted programming and offers to continue?
RE: ISTA-P Help for a boo Jr! - focist170 - 15-09-2019
(15-09-2019, 19:08 PM)Arg0N Wrote: Hey,
Did you try default coding module with ncs?
Yes I tried this. Problem is with the 2rad module
I
(15-09-2019, 19:41 PM)Enabled Wrote: What tool are you using?
I’ve tried ISTA-p
Then NCSexpert
I can’t get NFS to work properly
(15-09-2019, 21:26 PM)Node Wrote: Have you tried to start new session with ISTA-P and see if it detects aborted programming and offers to continue?
Yeah just tried it. No luck
RE: ISTA-P Help for a newbie - Node - 16-09-2019
Care to explain "problems" in more detail? Or do we need to be guessing?
RE: ISTA-P Help for a newbie - focist170 - 16-09-2019
Radio won’t turn on. I will take screens of ISTA p faults
RE: ISTA-P Help for a newbie - Enabled - 16-09-2019
By tool, we mean what did you connect to the car, not software...
RE: ISTA-P Help for a newbie - focist170 - 16-09-2019
I used a dcan cable