+- CarTechnoloGY (https://cartechnology.co.uk)
+-- Forum: All About IMMO/ECU , ChiPTuninG , Dashboard , Locksmith , AirbaG , Carradio (https://cartechnology.co.uk/forumdisplay.php?fid=3)
+--- Forum: IMMO & LOCKSMITH (https://cartechnology.co.uk/forumdisplay.php?fid=9)
+--- Thread: TMS374 ECU DECODER&SAGEM SL96 PSA (/showthread.php?tid=5661)
TMS374 ECU DECODER&SAGEM SL96 PSA - TAISHO6666 - 01-08-2014
Hi every body
Using tms374 ecu decoding to decode sagem SL96-3
The manual of the TMS374 ECU DECODER say
Pin 1 ---------12v+
Pin 2\3\18 ----------GND
Pin 27\48 immo data line ( cut )
When applying this connection, there is a short between these pins
I guss this pin connection is wrong, can any body help me with the right pin connection
When checking autodata for sagem SL96 ECU PIN OUT
PIN 13/35 ----------12V+
PIN 36/54 --------GND
Or I can cut pin 27\48 then fit ecu in the car and open ignition and start decoding process
Thanks for cooperation and assistance
RE: TMS374 ECU DECODER&SAGEM SL96 PSA - rafikvw - 02-08-2014
(01-08-2014, 23:41 PM)TAISHO6666 Wrote: Hi every body
Using tms374 ecu decoding to decode sagem SL96-3
The manual of the TMS374 ECU DECODER say
Pin 1 ---------12v+
Pin 2\3\18 ----------GND
Pin 27\48 immo data line ( cut )
When applying this connection, there is a short between these pins
I guss this pin connection is wrong, can any body help me with the right pin connection
When checking autodata for sagem SL96 ECU PIN OUT
PIN 13/35 ----------12V+
PIN 36/54 --------GND
Or I can cut pin 27\48 then fit ecu in the car and open ignition and start decoding process
Thanks for cooperation and assistance
Hi only pin 48 eliminate