+- CarTechnoloGY (https://cartechnology.co.uk)
+-- Forum: Discussions All about Software and Hardware (https://cartechnology.co.uk/forumdisplay.php?fid=310)
+--- Forum: Automotive Help & Discussions / Software and Hardware (https://cartechnology.co.uk/forumdisplay.php?fid=40)
+---- Forum: BMW - Mini - Rolls Royce (https://cartechnology.co.uk/forumdisplay.php?fid=61)
+---- Thread: Bmw F31 clone FEM (/showthread.php?tid=57068)
Bmw F31 clone FEM - Pedrom92 - 26-09-2019
Hello, is it possible to clone a FEM to a used one?
Thanks
RE: Bmw F31 clone FEM - osd - 26-09-2019
Yes
vvdi can
others tools also
RE: Bmw F31 clone FEM - Pedrom92 - 26-09-2019
But need new keys? Uses FEM need key? Dont have possible only change eeproms and make working?
RE: Bmw F31 clone FEM - osd - 26-09-2019
You can use old ones,
or you can erase old ones and add them again.
RE: Bmw F31 clone FEM - Pedrom92 - 26-09-2019
Thank you, in Portugal almost nobody has these tools. if there was an option to solder chips from one FEM to another it would be easier for me. better to buy a new one in the brand.
RE: Bmw F31 clone FEM - osd - 28-09-2019
(26-09-2019, 23:04 PM)Pedrom92 Wrote: Thank you, in Portugal almost nobody has these tools. if there was an option to solder chips from one FEM to another it would be easier for me. better to buy a new one in the brand.
It is possible
resolder eeprom + 2 x mcu - but im not sure is that easier....
RE: Bmw F31 clone FEM - Pedrom92 - 29-09-2019
Have any image eeprom and mcu?