CarTechnoloGY
Diagbox 7.83 Virtual Machine - Printable Version

+- CarTechnoloGY (https://cartechnology.co.uk)
+-- Forum: Discussions All about Software and Hardware (https://cartechnology.co.uk/forumdisplay.php?fid=310)
+--- Forum: Automotive Help & Discussions / Software and Hardware (https://cartechnology.co.uk/forumdisplay.php?fid=40)
+---- Forum: PSA Group (Citroen - Peugeot) (https://cartechnology.co.uk/forumdisplay.php?fid=56)
+---- Thread: Diagbox 7.83 Virtual Machine (/showthread.php?tid=57167)

Diagbox 7.83 Virtual Machine - minhqp - 29-09-2019

[img][Image: kp0h.jpg]http://[/img]
[img][Image: 1bex.jpg]http://[/img]

Hi all CT members, I just installed but not tested yet sad ....if someone can test it and tell me if it work good.
Caution: your system must be first 64 bit before install, your VM can be long for starting and it depends your
hardware.


RE: Diagbox 7.83 Virtual Machine - gpv - 29-09-2019

Hi minhqp,

Thanks for the software! I'm testing the v7.57 diagbox supplied. When trying to program the configuration of the Engine ECU (V46) of a Peugeot 2008 (year 2015) it gets further than other versions. I do get the window to change the configuration, but when 'downloading' the new configuration I get an error (code 415) sad
So no offline coding yet... 

I needed to add other drivers to get my device working though.
I'm using a clone from china with "PSA XS Evolution" on it.

Maybe tomorrow I can check the other diagbox version supplied.

Best regards,
Geert

RE: Diagbox 7.83 Virtual Machine - gpv - 30-09-2019

Tested the 7.83 Virtual Machine on the same vehicle:
   
This gives the usual error of no connection with the auth. server, see attachment sad. So no offline coding it seems!