+- CarTechnoloGY (https://cartechnology.co.uk)
+-- Forum: Discussions All about Software and Hardware (https://cartechnology.co.uk/forumdisplay.php?fid=310)
+--- Forum: Automotive Help & Discussions / Software and Hardware (https://cartechnology.co.uk/forumdisplay.php?fid=40)
+---- Forum: VAG Group (VW - Audi - Seat - Skoda - Bentley) (https://cartechnology.co.uk/forumdisplay.php?fid=55)
+---- Thread: Touran 2005 - steering fault (/showthread.php?tid=57239)
Touran 2005 - steering fault - autoraedarum - 30-09-2019
Car comes with error
Address 44: Steering Assist Labels: 1Kx-909-144-G2V2.clb
Control Module Part Number: 1K1 909 144 H
Component and/or Version: EPS_ZFLS Kl.6 1502
Software Coding:
Work Shop Code: WSC 00000 000 00000
VCID: B02C562D23BF30CFA9-80E4
1 Fault Found:
00003 - Control Module
014 - Defective - MIL ON
and in MWB 2 Relaisvoltage 8.6V
in MWB 9 the steering curve is 69
I look vor voltage on connectors and all is OK
Now i flashed a new software with this file lh0041504 and for steering curve this one v074M0691K0___Lenkung.
But now i have this errors and in MWB 9 there is 0
Address 44: Steering Assist Labels: 1Kx-909-144-G2V2.clb
Control Module Part Number: 1K1 909 144 H
Component and/or Version: EPS_ZFLS Kl.6 1504
Software Coding:
Work Shop Code: WSC 00000 000 00000
VCID: B02C562D23BF30CFA9-80E4
3 Faults Found:
00003 - Control Module
014 - Defective - MIL ON
00003 - Control Module
005 - No or Incorrect Basic Setting / Adaptation
02870 - Function Restricted due to Faulty Data
008 - Implausible Signal - MIL ON
Freeze Frame:
Mileage: 2280 km
Temperature: 22.0°C
Voltage: 7.80 V
Voltage: 13.10 V
Someone know if i have flashed the right steering curve ?
Thanks
RE: Touran 2005 - steering fault - mattdj - 30-09-2019
(30-09-2019, 15:02 PM)autoraedarum Wrote: Car comes with error
Address 44: Steering Assist Labels: 1Kx-909-144-G2V2.clb
Control Module Part Number: 1K1 909 144 H
Component and/or Version: EPS_ZFLS Kl.6 1502
Software Coding:
Work Shop Code: WSC 00000 000 00000
VCID: B02C562D23BF30CFA9-80E4
1 Fault Found:
00003 - Control Module
014 - Defective - MIL ON
and in MWB 2 Relaisvoltage 8.6V
in MWB 9 the steering curve is 69
I look vor voltage on connectors and all is OK
Now i flashed a new software with this file lh0041504 and for steering curve this one v074M0691K0___Lenkung.
But now i have this errors and in MWB 9 there is 0
Address 44: Steering Assist Labels: 1Kx-909-144-G2V2.clb
Control Module Part Number: 1K1 909 144 H
Component and/or Version: EPS_ZFLS Kl.6 1504
Software Coding:
Work Shop Code: WSC 00000 000 00000
VCID: B02C562D23BF30CFA9-80E4
3 Faults Found:
00003 - Control Module
014 - Defective - MIL ON
00003 - Control Module
005 - No or Incorrect Basic Setting / Adaptation
02870 - Function Restricted due to Faulty Data
008 - Implausible Signal - MIL ON
Freeze Frame:
Mileage: 2280 km
Temperature: 22.0°C
Voltage: 7.80 V
Voltage: 13.10 V
Someone know if i have flashed the right steering curve ?
Thanks
You hace tried with make basic settings? Coding it's right?
Because flash it's right. But before flash it's working well?
RE: Touran 2005 - steering fault - autoraedarum - 30-09-2019
Here a TPI with note that this error should disappear with an update
| link.txt | ||
| File Type: |
|
 |
| Downloaded: | 23 times | |
| Size: | 359 bytes | |