AMB2300 PCB Rework - Printable Version +- CarTechnoloGY (https://cartechnology.co.uk) +-- Forum: Discussions All about Software and Hardware (https://cartechnology.co.uk/forumdisplay.php?fid=310) +--- Forum: Automotive Help & Discussions / Software and Hardware (https://cartechnology.co.uk/forumdisplay.php?fid=40) +---- Forum: VAG Group (VW - Audi - Seat - Skoda - Bentley) (https://cartechnology.co.uk/forumdisplay.php?fid=55) +---- Thread: AMB2300 PCB Rework (/showthread.php?tid=57260) |
AMB2300 PCB Rework - toza27 - 30-09-2019 In addition to the subject that deals with the processing of the VAS5054A, I also add a way of processing the plate for the AMB2300, for those who do not own the Safting board. Starting from the data sheet of the AMB2300 module I determined pins from the Softing board connector. Next we have adapted the board to the needs of the BT module. I soldered a resistance of zero Ohm, to make the continuity, two of 22 Ohm, one of 1000 Ohm in addition to which I added one of 0 Ohm to ensure the required length; a tantalum capacitor with a value of 10 microF, and a 100 nanoF ceramic. Because the position of the connectors on the front of the plate does not correspond to the original one, I made the connections with the help of some pieces of wire. Finally, the test with ODIS-S v5.1.6 Componnent: 1608 0 Ohm - 1 1608 22 Ohm - 2 3225 1000 Ohm - 1 2520 0 Ohm - 1 3216 10 microF Tantalum caps - 1 1608 100 nanoF ceramic caps - 1 |