+- CarTechnoloGY (https://cartechnology.co.uk)
+-- Forum: Discussions All about Software and Hardware (https://cartechnology.co.uk/forumdisplay.php?fid=310)
+--- Forum: Automotive Help & Discussions / Software and Hardware (https://cartechnology.co.uk/forumdisplay.php?fid=40)
+---- Forum: Ford - Mazda (https://cartechnology.co.uk/forumdisplay.php?fid=69)
+---- Thread: VCMM recovery (/showthread.php?tid=57500)
VCMM recovery - B4RTJ - 05-10-2019
Hi All,
Does anyone knows how to force this bloody VCMM (MTS5440) to recover? is doing some work restoring roofs.ubi.img.gpg, but then suddenly says " The connection between the PC and the VCI has been broken". Power supply is stable 12V via charging port, usb connection is not interrupted.
Any idea?
RE: VCMM recovery - rs@chip - 05-10-2019
(05-10-2019, 16:13 PM)B4RTJ Wrote: Hi All,
Does anyone knows how to force this bloody VCMM (MTS5440) to recover? is doing some work restoring roofs.ubi.img.gpg, but then suddenly says " The connection between the PC and the VCI has been broken". Power supply is stable 12V via charging port, usb connection is not interrupted.
Any idea?
I would resolder all critical soldering points and than retry recovery..
RE: VCMM recovery - B4RTJ - 05-10-2019
(05-10-2019, 16:24 PM)rs@chip Wrote: I would resolder all critical soldering points and than retry recovery..
thanks, will do, but strange point is, that equipment is not moved at all, and always error comes up at the same moment. i even replaced sd card, as i thought that it may be a problem, but is not.
RE: VCMM recovery - rs@chip - 05-10-2019
(05-10-2019, 16:38 PM)B4RTJ Wrote:(05-10-2019, 16:24 PM)rs@chip Wrote: I would resolder all critical soldering points and than retry recovery..
thanks, will do, but strange point is, that equipment is not moved at all, and always error comes up at the same moment. i even replaced sd card, as i thought that it may be a problem, but is not.
maybe try other pc I had simular problem fw update didnt pass on 64bit sistem over ids softwere.. worth try
RE: VCMM recovery - B4RTJ - 06-10-2019
(05-10-2019, 18:23 PM)rs@chip Wrote: maybe try other pc I had similar problem fw update didnt pass on 64bit sistem over ids softwere.. worth try
ok, tried 32 and 64bits - same behaviour.
laptop with and without IDS - same
old / new sd card - same
win 7 - same
win 7 /compatibility mode with XP - same
what im missing?
which component you think need to be re-soldered/replaced? cheers.
RE: VCMM recovery - joey07 - 06-10-2019
iMX6 or flash memory, both BGA soldered.
Strange is that the S/N is not shown...
RE: VCMM recovery - B4RTJ - 07-10-2019
(06-10-2019, 08:41 AM)joey07 Wrote: iMX6 or flash memory, both BGA soldered.
Strange is that the S/N is not shown...
done, all 3. same behaviour. that must be something silly which im missing...