+- CarTechnoloGY (https://cartechnology.co.uk)
+-- Forum: Discussions All about Software and Hardware (https://cartechnology.co.uk/forumdisplay.php?fid=310)
+--- Forum: Automotive Help & Discussions / Software and Hardware (https://cartechnology.co.uk/forumdisplay.php?fid=40)
+---- Forum: Ford - Mazda (https://cartechnology.co.uk/forumdisplay.php?fid=69)
+---- Thread: Ford Focus mk3 u3000 fault (/showthread.php?tid=57541)
Ford Focus mk3 u3000 fault - miami - 06-10-2019
Hello everyone!
Could you help me with ford focus u3000 I got a DTC.
I read about updates and calibration in many forums.
Do I need firmware to do this? My SW number is BV6c-3c579-AF calibration number BV6T-14C218-AE.
Thanks for all the comments.
M
RE: Ford Focus mk3 u3000 fault - elektronik13 - 06-10-2019
(06-10-2019, 13:24 PM)miami Wrote: Hello everyone!U3000 error is a steering wheel position sensor error
Could you help me with ford focus u3000 I got a DTC.
I read about updates and calibration in many forums.
Do I need firmware to do this? My SW number is BV6c-3c579-AF calibration number BV6T-14C218-AE.
Thanks for all the comments.
M
RE: Ford Focus mk3 u3000 fault - miami - 06-10-2019
(06-10-2019, 16:01 PM)elektronik13 Wrote:(06-10-2019, 13:24 PM)miami Wrote: Hello everyone!U3000 error is a steering wheel position sensor error
Could you help me with ford focus u3000 I got a DTC.
I read about updates and calibration in many forums.
Do I need firmware to do this? My SW number is BV6c-3c579-AF calibration number BV6T-14C218-AE.
Thanks for all the comments.
M
This is new information!
Many pages and everyone talks about calibration file and eeprom 95320.
The steering wheel position sensor shows good value.
Do you have any ideas for a solution?
RE: Ford Cmax pscm error U3000 - miami - 06-10-2019
Could you help me with ford focus u3000 I got a DTC.
I read about updates and calibration in many forums.
Do I need firmware to do this? My SW number is BV6c-3c579-AF calibration number BV6T-14C218-AE.
Thanks for all the comments.
M
RE: Ford Focus mk3 u3000 fault - foks95 - 14-10-2019
Welcome.
I had at the workshop focus mk3 2011. There was a u3000 error. The steering wheel position sensor shows good value but the driver of sterring wheel was damaged. Driver replacement solved the problem.
Sorry for my bad english - i'm from poland