Honda HDS TO Work with HIM and GNA600 Reg file

Honda HDS TO Work with HIM and GNA600 Reg file - Printable Version

+- CarTechnoloGY (https://cartechnology.co.uk)
+-- Forum: Discussions All about Software and Hardware (https://cartechnology.co.uk/forumdisplay.php?fid=310)
+--- Forum: Automotive Help & Discussions / Software and Hardware (https://cartechnology.co.uk/forumdisplay.php?fid=40)
+---- Forum: Honda - Acura (https://cartechnology.co.uk/forumdisplay.php?fid=66)
+---- Thread: Honda HDS TO Work with HIM and GNA600 Reg file (/showthread.php?tid=577)

Pages: 1 2

Honda HDS TO Work with HIM and GNA600 Reg file - TizWoz - 06-11-2013

Here is regfile to make 3 version work with him and gna600

_Him_.rar
File Type:
Downloaded:	389 times
Size:	316 bytes

to swap from him to gna600, open reg file and swap "him" for "GNA600" save and install.

First time you start him, it will take some time to work becuase hds is installing you chossen devices files.
Here is video

RE: Honda HDS TO Work with HIM and GNA600 Reg file - autotech40 - 05-04-2014

@TizWoz can hds version 3.002.032 be made to work for usa with imobilizer and ecu rewrite?thanks

RE: Honda HDS TO Work with HIM and GNA600 Reg file - Starmobile - 06-04-2014

(05-04-2014, 21:37 PM)autotech40 Wrote: @TizWoz can hds version 3.002.032 be made to work for usa with imobilizer and ecu rewrite?thanks

Hi,i install this version hds 3.002.032 with canada install and immo work fine,you can patch dealer code for usa,i try on acura mdx 2012 for ecu replace and all key lost and all work ok,thanks.

RE: Honda HDS TO Work with HIM and GNA600 Reg file - corek66 - 06-04-2014

Any chance for i-shift map PJ 3350 ?
Thanks for all

RE: Honda HDS TO Work with HIM and GNA600 Reg file - TizWoz - 19-04-2014

(06-04-2014, 14:58 PM)corek66 Wrote: Any chance for i-shift map PJ 3350 ?
Thanks for all

I did not see this file over many versions of HDS sad

I ASK DID YOU SEE IT EVER ? OR ANYONE ELSE ?

If you did , or someone can post it and I can add it to the database the correct way

RE: Honda HDS TO Work with HIM and GNA600 Reg file - corek66 - 25-04-2014

(19-04-2014, 13:36 PM)TizWoz Wrote:
(06-04-2014, 14:58 PM)corek66 Wrote: Any chance for i-shift map PJ 3350 ?
Thanks for all

I did not see this file over many versions of HDS

I ASK DID YOU SEE IT EVER ? OR ANYONE ELSE ?

If you did , or someone can post it and I can add it to the database the correct way

I did find here http://www.civic-club.ru/forum/showthread.php?t=103999&page=3
it seems that last update is 5.09.2012 for i-shift
P.S.HDS Ver.3.010.013 + ECU Update Database 08-SEP-2013

28125-RPJ-3270
28125-RPJ-3350
28125-RPJ-3360
28125-RPJ-4050
thanks

RE: Honda HDS TO Work with HIM and GNA600 Reg file - kingauto - 27-04-2014

Hello

HDS has been diverted from the other.
HIM. reg was using the one provided by you or.
I was able to fault diagnosis.
But I could not write about the ECU.

I'll try a little.

RE: Honda HDS TO Work with HIM and GNA600 Reg file - TizWoz - 29-04-2014

(27-04-2014, 01:06 AM)kingauto Wrote: Hello

HDS has been diverted from the other.
HIM. reg was using the one provided by you or.
I was able to fault diagnosis.
But I could not write about the ECU.

I'll try a little.

you need to use the ecurewrite I provided.

(25-04-2014, 15:16 PM)corek66 Wrote:
(19-04-2014, 13:36 PM)TizWoz Wrote:
(06-04-2014, 14:58 PM)corek66 Wrote: Any chance for i-shift map PJ 3350 ?
Thanks for all

I did not see this file over many versions of HDS

I ASK DID YOU SEE IT EVER ? OR ANYONE ELSE ?

If you did , or someone can post it and I can add it to the database the correct way
I did find here http://www.civic-club.ru/forum/showthread.php?t=103999&page=3
it seems that last update is 5.09.2012 for i-shift
P.S.HDS Ver.3.010.013 + ECU Update Database 08-SEP-2013

28125-RPJ-3270
28125-RPJ-3350
28125-RPJ-3360
28125-RPJ-4050
thanks

mate ......If you post the files I will add them to the next database.

(29-04-2014, 17:54 PM)TizWoz Wrote:
(27-04-2014, 01:06 AM)kingauto Wrote: Hello

HDS has been diverted from the other.
HIM. reg was using the one provided by you or.
I was able to fault diagnosis.
But I could not write about the ECU.

I'll try a little.

you need to use the ecurewrite I provided.

(25-04-2014, 15:16 PM)corek66 Wrote:
(19-04-2014, 13:36 PM)TizWoz Wrote:
(06-04-2014, 14:58 PM)corek66 Wrote: Any chance for i-shift map PJ 3350 ?
Thanks for all

I did not see this file over many versions of HDS

I ASK DID YOU SEE IT EVER ? OR ANYONE ELSE ?

If you did , or someone can post it and I can add it to the database the correct way
I did find here http://www.civic-club.ru/forum/showthread.php?t=103999&page=3
it seems that last update is 5.09.2012 for i-shift
P.S.HDS Ver.3.010.013 + ECU Update Database 08-SEP-2013

28125-RPJ-3270
28125-RPJ-3350
28125-RPJ-3360
28125-RPJ-4050
thanks

mate ......If you post the files I will add them to the next database.

also I will look in all my files because I have any many.

RE: Honda HDS TO Work with HIM and GNA600 Reg file - thusithasam - 01-05-2014

(06-11-2013, 15:02 PM)TizWoz Wrote: Here is regfile to make 3 version work with him and gna600

to swap from him to gna600, open reg file and swap "him" for "GNA600" save and install.

First time you start him, it will take some time to work becuase hds is installing you chossen devices files.
Here is video

Mr.TizWoz,
I see many topics this site and other sites.

I have Allscanner VCX(Same like GNA600).I am using ver.2.027.00.Marker: GENERAL. but the problem is after I communicate with vehicle(Honda Insight 2010) I can't go to SRS. When I click SRS tab HDS says "NO COMMUNICATION WITH SRS".can you please tell me what is wrong with HDS software? Do I need to edit some files?

I did try to download ver 3 buy I couldn't. if u have direct link to download please send me.

Have a good day.............

RE: Honda HDS TO Work with HIM and GNA600 Reg file - TizWoz - 02-05-2014

(01-05-2014, 18:10 PM)thusithasam Wrote:
(06-11-2013, 15:02 PM)TizWoz Wrote: Here is regfile to make 3 version work with him and gna600

to swap from him to gna600, open reg file and swap "him" for "GNA600" save and install.

First time you start him, it will take some time to work becuase hds is installing you chossen devices files.
Here is video

Mr.TizWoz,
I see many topics this site and other sites.

I have Allscanner VCX(Same like GNA600).I am using ver.2.027.00.Marker: GENERAL. but the problem is after I communicate with vehicle(Honda Insight 2010) I can't go to SRS. When I click SRS tab HDS says "NO COMMUNICATION WITH SRS".can you please tell me what is wrong with HDS software? Do I need to edit some files?

I did try to download ver 3 buy I couldn't. if u have direct link to download please send me.

Have a good day.............

what make you think its the software and not the tool ?