CarTechnoloGY
DSG 7 0AM mechatronic issue - Printable Version

+- CarTechnoloGY (https://cartechnology.co.uk)
+-- Forum: Discussions All about Software and Hardware (https://cartechnology.co.uk/forumdisplay.php?fid=310)
+--- Forum: Automotive Help & Discussions / Software and Hardware (https://cartechnology.co.uk/forumdisplay.php?fid=40)
+---- Forum: VAG Group (VW - Audi - Seat - Skoda - Bentley) (https://cartechnology.co.uk/forumdisplay.php?fid=55)
+---- Thread: DSG 7 0AM mechatronic issue (/showthread.php?tid=57767)



DSG 7 0AM mechatronic issue - phydor - 10-10-2019

Hi there guys, I have these intermittent errors on the gearbox.It is overreving and not changing gears from time to time but I haven't got any errors until yesterday.When interrogating the DSG ECU had those 3, attached in screenshots.
What could be at fault? The hydraulic accumulator?I've seen a repair kit for it but also for the other components too,
Thanks


RE: DSG 7 0AM mechatronic issue - blackTDI - 10-10-2019

Did you change oil filter when changing oil in dsg? Maybe sensor fail but check dsg filter. You can check accumulator manual with manometer to see if correct pressure or broken “balloon “


RE: DSG 7 0AM mechatronic issue - phydor - 10-10-2019

(10-10-2019, 18:04 PM)blackTDI Wrote:  Did you change oil filter when changing oil in dsg? Maybe sensor fail but check dsg filter. You can check accumulator manual with manometer to see if correct pressure or broken “balloon “
This gearbox doesn't need oil change.It has 1,8 l capacity and mechatronics unit and gearbox itself have different oil circuits.


RE: DSG 7 0AM mechatronic issue - ototest - 10-10-2019

(10-10-2019, 17:50 PM)phydor Wrote:  Hi there guys, I have these intermittent errors on the gearbox.It is overreving and not changing gears from time to time but I haven't got any errors until yesterday.When interrogating the DSG ECU had those 3, attached in screenshots.
What could be at fault? The hydraulic accumulator?I've seen a repair kit for it but also for the other components too,
Thanks

under

First check oil pressure of inside mechatronik, if below than 42 bar , it need repair. Dont make basic settings if pressure is low than 42 bar.

drive


RE: DSG 7 0AM mechatronic issue - phydor - 10-10-2019

(10-10-2019, 20:20 PM)ototest Wrote:  
(10-10-2019, 17:50 PM)phydor Wrote:  Hi there guys, I have these intermittent errors on the gearbox.It is overreving and not changing gears from time to time but I haven't got any errors until yesterday.When interrogating the DSG ECU had those 3, attached in screenshots.
What could be at fault? The hydraulic accumulator?I've seen a repair kit for it but also for the other components too,
Thanks

under

First check oil pressure of inside mechatronik, if below than 42 bar , it need repair. Dont make basic settings if pressure is low than 42 bar.

drive
Yeah, you told me that from what I remember but the fault is intermittent and even more, it appeared yesterday after 2 months.That pressure drop gives me some indication that I should replace the hydraulic accumulator.Nevertheless, i ll take a look tomorrow at the pressure.
Thanks


RE: DSG 7 0AM mechatronic issue - phydor - 11-10-2019

So I checked all the pressures I could see, there was nothing below 42 bar.


RE: DSG 7 0AM mechatronic issue - jhon006 - 11-10-2019

need new mechatronic unit,.. is a common problem, after software update


RE: DSG 7 0AM mechatronic issue - phydor - 11-10-2019

(11-10-2019, 18:26 PM)jhon006 Wrote:  need new mechatronic unit,..  is a common problem, after software update
I can repair it in Poland with 400$.But firstly I ll change the hydraulic accumulator and its casing.If that doesn't work, i ll send it to Poland.
Does anyone have another opinion on this?