Unable to code a new airbag control unit !!! VW10 5N0959655AA - Printable Version +- CarTechnoloGY (https://cartechnology.co.uk) +-- Forum: All About IMMO/ECU , ChiPTuninG , Dashboard , Locksmith , AirbaG , Carradio (https://cartechnology.co.uk/forumdisplay.php?fid=3) +--- Forum: AIRBAG (https://cartechnology.co.uk/forumdisplay.php?fid=13) +--- Thread: Unable to code a new airbag control unit !!! VW10 5N0959655AA (/showthread.php?tid=5783) |
Unable to code a new airbag control unit !!! VW10 5N0959655AA - xtek - 09-08-2014 Hello, I hope and wish anyone can help me on this matter. We have a Seat Leon 2008, which we've replaced the Airbag control unit because it have stored a fault code: --------------------- Address 15: Airbags Labels: 5N0-959-655.lbl Part No SW: 5N0 959 655 A HW: 5N0 959 655 A Component: J234__A01 VW10 HI 1815 Revision: 19013000 Serial number: 0039DP6ED1QO Coding: 0012337 Shop #: WSC 06402 785 00200 VCID: 3B7E38C57A2630C68E5-806E Subsystem 1 - Serial number: 6333FTS630380888 Subsystem 2 - Serial number: 6343FTS646120888 Subsystem 3 - Serial number: 6353ETS6DN12TVNH Subsystem 4 - Serial number: 6363ETS64L02TVNH Subsystem 5 - Serial number: 00000000000000000 Subsystem 6 - Serial number: 00000000000000000 1 Fault Found: 00003 - Control Module 014 - Defective - MIL ON Freeze Frame: Fault Status: 11101110 Fault Priority: 2 Fault Frequency: 254 Reset counter: 110 Mileage: 127760 km Time Indication: 0 Date: 2000.00.00 ------------------------ We ordered the replacement at the delaer, they supplied 5N0959655AA/00D Of course we used several times the code 00D/0D to try to code the unit, using the workshopcode 12345 or the stored on the older unit. Also after this, we tried a lot of codes 09,07 and a lot of them, and all of them are rejected. Can you help us or do you know why the unit can't be coded? Address 15: Airbags Labels: 5N0-959-655.lbl Part No SW: 5N0 959 655 AA HW: 5N0 959 655 AA Component: J234__ VW10 HI 2518 Revision: 27019000 Serial number: 003L7P4CLA8P Coding: 0000000 Shop #: WSC 00000 000 00000 VCID: 7CFCFBD93FA8F7DADF-8029 Subsystem 1 - Serial number: 6332MTS630380888 Subsystem 2 - Serial number: 6342MTS646120888 Subsystem 3 - Serial number: 6351HTS6DN12TVNH Subsystem 4 - Serial number: 6361HTS64L02TVNH Subsystem 5 - Serial number: 00000000000000000 Subsystem 6 - Serial number: 00000000000000000 1 Fault Found: 01042 - Control Module; Not Coded 000 - - Thanks in advance RE: Unable to code a new airbag control unit !!! VW10 5N0959655AA - Sky walker - 10-08-2014 Hi Have you sent a log to Ross tech? The index/ colour code doesn't appear in the new scan Regards RE: Unable to code a new airbag control unit !!! VW10 5N0959655AA - xtek - 10-08-2014 (10-08-2014, 07:10 AM)Sky walker Wrote: Hi Yes I did, but still no answer from they, About the index colour I suppose not will appear until is not coded, of course the unit comes with the label with the index code attached. But all codes are rejected, All codes are tried are from this table but this codes are for 1J0/6N0 units and until 2006... RE: Unable to code a new airbag control unit !!! VW10 5N0959655AA - seba100377 - 10-08-2014 Read memory 95640 and send it here RE: Unable to code a new airbag control unit !!! VW10 5N0959655AA - xtek - 10-08-2014 (10-08-2014, 08:32 AM)seba100377 Wrote: Read memory 95640 and send it here How can I do that? thank you! RE: Unable to code a new airbag control unit !!! VW10 5N0959655AA - Sky walker - 10-08-2014 00 index for 5n0 959 655 family uses 0012336 RE: Unable to code a new airbag control unit !!! VW10 5N0959655AA - seba100377 - 10-08-2014 You need to remove airbag sensor from the car to open it and read the memory 95640 with the programmer; carprog,mprog ,etc. RE: Unable to code a new airbag control unit !!! VW10 5N0959655AA - xtek - 10-08-2014 (10-08-2014, 08:47 AM)Sky walker Wrote: 00 index for 5n0 959 655 family uses 0012336 Thanks, will try but this one is 0D index |