Radio Nissan Qashqai LCN2 pinout - Printable Version +- CarTechnoloGY (https://cartechnology.co.uk) +-- Forum: All About IMMO/ECU , ChiPTuninG , Dashboard , Locksmith , AirbaG , Carradio (https://cartechnology.co.uk/forumdisplay.php?fid=3) +--- Forum: CARRADIO / NAVIGATION (https://cartechnology.co.uk/forumdisplay.php?fid=14) +--- Thread: Radio Nissan Qashqai LCN2 pinout (/showthread.php?tid=57918) Pages:
1
2
|
Radio Nissan Qashqai LCN2 pinout - karmazyn - 14-10-2019 Hello I try to connect radio from Nissan on the bench and I can not get to working so I need some help to get pinout RE: Radio Nissan Qashqai LCN2 pinout - gpdriver - 14-10-2019 hereUgo ................................ RE: Radio Nissan Qashqai LCN2 pinout - karmazyn - 14-10-2019 Thank you so pin 19 BATTERY pin 40 IGN pin 20 GND What is the pinout for this connector? RE: Radio Nissan Qashqai LCN2 pinout - gpdriver - 14-10-2019 (14-10-2019, 08:55 AM)karmazyn Wrote: Thank you so look on m48 and m49 RE: Radio Nissan Qashqai LCN2 pinout - karmazyn - 14-10-2019 Hello yes this is good connection but the Radio switch on for 5 sec and off and now the radio is no working. Is there any fuse that can be demage? RE: Radio Nissan Qashqai LCN2 pinout - gpdriver - 14-10-2019 (14-10-2019, 10:52 AM)karmazyn Wrote: Hello yes this is good connection but the Radio switch on for 5 sec and off and now the radio is no working. Is there any fuse that can be demage? need CAN sig. from BCM RE: Radio Nissan Qashqai LCN2 pinout - karmazyn - 14-10-2019 ok but I thing something was happened that the radio was on for 3 sec and off and now is not responding RE: Radio Nissan Qashqai LCN2 pinout - mhamid56 - 22-10-2019 Hi all members I need your help and experiences in replacing Display Audio unit (without navigation) to Nissan Connect 3 (LCN2) in Nissan Qashqai 2018, 1.2 Dig-T Tekna. Because the wiring is different I did an adaptor All things working good, except the camera (4cameras) not working. Any detailed informations and wiring diagrams upon your request. Thank you in advance RE: Radio Nissan Qashqai LCN2 pinout - mhamid56 - 23-10-2019 I need your support Mr.gpdriver and Mr.karmazyn to discover the fault in wiring connection I will send the diagram of the adaptor for revising connection RE: Radio Nissan Qashqai LCN2 pinout - karmazyn - 24-10-2019 Today I try connect the used radio with emulator from codecard but is not working still the same on the screen. So now I need to try to repair the oryginal radio. I find two components defect. One is IC chip 610LV AA, second one is 2M400FDA. Is somebody with experience to fix this king of radio? And here is the picture of emulator connect on the board. |