+- CarTechnoloGY (https://cartechnology.co.uk)
+-- Forum: Discussions All about Software and Hardware (https://cartechnology.co.uk/forumdisplay.php?fid=310)
+--- Forum: Automotive Help & Discussions / Software and Hardware (https://cartechnology.co.uk/forumdisplay.php?fid=40)
+---- Forum: BMW - Mini - Rolls Royce (https://cartechnology.co.uk/forumdisplay.php?fid=61)
+---- Thread: ISTA-D and ISTA-P not Working! (/showthread.php?tid=58124)
ISTA-D and ISTA-P not Working! - JoaoVaranda - 17-10-2019
Hello community,
I have installed ISTA-D and ISTA-P on my computer, but when I try connect to my car with K+DKAN cable nothing happens.
I have on my computer NCS Expert and INPA and these tools is working very well (NCS Expert, INPA and WinKFP).
I use the same EDIABAS to use these tools, I've checked on youtube and suposly these two different tools is compatible without problems, and I followed the installation instructions carefully.
I'm using COM1 port (I already tryed with COM9 but unsuccessfully).
Someone with the same problem?
ISTA-D ERROR:
![[Image: bjbwCd4.png]](https://i.imgur.com/bjbwCd4.png)
ISTA-P ERRORS:
![[Image: iAiOxvp.png]](https://i.imgur.com/iAiOxvp.png)
![[Image: Gqejhdy.png]](https://i.imgur.com/Gqejhdy.png)
RE: ISTA-D and ISTA-P not Working! - Bimmer540 - 17-10-2019
Can you post picture from ista+ settings -- interface
RE: ISTA-D and ISTA-P not Working! - obdcloud - 17-10-2019
what is the car??
RE: ISTA-D and ISTA-P not Working! - JoaoVaranda - 17-10-2019
(17-10-2019, 20:40 PM)snypertje Wrote: Can you post picture from ista+ settings -- interface
Sure
![[Image: s7DM2PV.png]](https://i.imgur.com/s7DM2PV.png)
(17-10-2019, 21:11 PM)obdcloud Wrote: what is the car??
BMW E46 320D 150HP
RE: ISTA-D and ISTA-P not Working! - user0086 - 17-10-2019
To which port did you connect the cable? OBD2 or the 20-pin round BMW connector? Can you access all modules with INPA / NCS Expert?
RE: ISTA-D and ISTA-P not Working! - JoaoVaranda - 17-10-2019
(17-10-2019, 21:55 PM)user0086 Wrote: To which port did you connect the cable? OBD2 or the 20-pin round BMW connector? Can you access all modules with INPA / NCS Expert?
OBD2
By the way, the 20 pin has problems with that?
Yes, I can.
RE: ISTA-D and ISTA-P not Working! - Sedoy - 18-10-2019
Try Workaround:
1. open Session in ISTA with your VIN
2. if all Ok, connect to Car
3. make complete identification
RE: ISTA-D and ISTA-P not Working! - JoaoVaranda - 18-10-2019
(18-10-2019, 04:07 AM)Sedoy Wrote: Try Workaround:
1. open Session in ISTA with your VIN
I have inserted my VIN but it still with same problem.
(18-10-2019, 04:07 AM)Sedoy Wrote: Try Workaround:
3. make complete identification
I have tested, but not working.
RE: ISTA-D and ISTA-P not Working! - Spirit5676 - 19-10-2019
(18-10-2019, 19:49 PM)JoaoVaranda Wrote:(18-10-2019, 04:07 AM)Sedoy Wrote: Try Workaround:
1. open Session in ISTA with your VIN
I have inserted my VIN but it still with same problem.
(18-10-2019, 04:07 AM)Sedoy Wrote: Try Workaround:
3. make complete identification
I have tested, but not working.
Which model year is the car? If it's before 2001 it has the round connector under the hood and it should be used per BMW official instructions. If a BMW has the round connector under the hood, it's the only one that is connector to all modules.
Which Ediabas is installed?
RE: ISTA-D and ISTA-P not Working! - JoaoVaranda - 19-10-2019
(19-10-2019, 13:32 PM)Spirit5676 Wrote: Which model year is the car? If it's before 2001 it has the round connector under the hood and it should be used per BMW official instructions. If a BMW has the round connector under the hood, it's the only one that is connector to all modules.
Which Ediabas is installed?
Is BMW E46 320D 150HP from 2002.
Him has OBD2 connector.
My EDIABAS version is: 7.3.0
My ISTA-D version is: 4.19.40
My ISTA-P version is: 3.66.0.200