bmw f11 edc off with coding ? - Printable Version +- CarTechnoloGY (https://cartechnology.co.uk) +-- Forum: Discussions All about Software and Hardware (https://cartechnology.co.uk/forumdisplay.php?fid=310) +--- Forum: Automotive Help & Discussions / Software and Hardware (https://cartechnology.co.uk/forumdisplay.php?fid=40) +---- Forum: BMW - Mini - Rolls Royce (https://cartechnology.co.uk/forumdisplay.php?fid=61) +---- Thread: bmw f11 edc off with coding ? (/showthread.php?tid=58232) |
bmw f11 edc off with coding ? - budddyyy - 20-10-2019 hallo can i turn off the edc drive electronic dämpfer controll what i must do for this job ? which vo i must take out and which ecu must vo code? and in need to take pur the pins from zgw ? sorry for my bad english and thanks in advance RE: bmw f11 edc off with coding ? - xxiFear - 20-10-2019 German english at its best ... I guess you have EDC module installed so its the following: Remove 2VF from VO and code DSC, Kombi, ICM, HU. Then disconnect EDC module or remove fuses. RE: bmw f11 edc off with coding ? - budddyyy - 20-10-2019 i dont know i have edc module ? i see that every sensor has 2 wires which come from the zgw and 2vf is not there car has 223 229 and 2va RE: bmw f11 edc off with coding ? - hitmanre - 20-10-2019 in f30 its in trunk for edc module than as xxifear says remove and vo code RE: bmw f11 edc off with coding ? - BMWzone - 20-10-2019 (20-10-2019, 12:18 PM)xxiFear Wrote: German english at its best ... will not be enough, has to close channel on ZGW, remove 2nd ICM or VDC, if car have 229 it's a problem, need to replace damper, electronic damper works only with electronic system. Anyway exist normal damper with emulator, no need coding out RE: bmw f11 edc off with coding ? - budddyyy - 22-10-2019 thansk for all for the help i have now testes a few options ... everytime i take 223 from vo then i have many errors for example steering or passenger ...... the only thing what helped was to remove 223,229 and 2va. then no errors, but now i think the car has no dynamic drive RE: bmw f11 edc off with coding ? - kimz - 11-01-2024 //refresh Is there a way to remove only 2VA, 223 EDC and left 229 Dynamic Drive from F11? RE: bmw f11 edc off with coding ? - user_530d - 11-01-2024 (11-01-2024, 11:21 AM)kimz Wrote: //refresh No. SA2VA need SA223 but F11 dont have SA229. SA2VA has integrated SA229 RE: bmw f11 edc off with coding ? - kimz - 11-01-2024 (11-01-2024, 12:00 PM)user_530d Wrote:(11-01-2024, 11:21 AM)kimz Wrote: //refresh This is why when i try calculating SVT for 229 only, the ICM_V ecu disappears. Thanks for the info, I couldn't find anywhere whether Dynamic Drive was present in F11 without EDC RE: bmw f11 edc off with coding ? - Node - 11-01-2024 In F10 series to have ICM_V you MUST have 223 or 2VA. If 223 is along with 229, you get different ICM_V. |