+- CarTechnoloGY (https://cartechnology.co.uk)
+-- Forum: All About IMMO/ECU , ChiPTuninG , Dashboard , Locksmith , AirbaG , Carradio (https://cartechnology.co.uk/forumdisplay.php?fid=3)
+--- Forum: DASHBOARD (https://cartechnology.co.uk/forumdisplay.php?fid=10)
+--- Thread: Solved ✔ Use CH341A programmer to read 93c86 eeprom? (/showthread.php?tid=58251)
Use CH341A programmer to read 93c86 eeprom? - Machete1401 - 21-10-2019
Hey guys!
First I'd like to say I'm glad forums like this exist and I hope to learn alot here. Starting my first thread with this question ;
Is it possible to read a 93c86 eeprom of a VW Polo 9N Year 2004 Marelli dash with a CH341A programmer?
My goal is to retrieve the key code because immo off on the IAW4MV ecu worked but the engine runs horrible even though I checked everything.
I want to virginize the ecu in the end and adapt keys and dash to ecu so everything is original.
Cheers
RE: Use CH341A programmer to read 93c86 eeprom? - volavka - 21-10-2019
not possible... CH341A for SPI,I2C family not Microwire
Regards
RE: Use CH341A programmer to read 93c86 eeprom? - Machete1401 - 21-10-2019
(21-10-2019, 07:18 AM)volavka Wrote: not possible... CH341A for SPI,I2C family not Microwire
Regards
OK thanks for the quick reply. Any suggestions on what programmer I can buy in addition to my CH341A so I can cover a greater variety?
Regards
RE: Use CH341A programmer to read 93c86 eeprom? - volavka - 21-10-2019
Xprog , UPA , VVDI Prog.........!
Regards
RE: Use CH341A programmer to read 93c86 eeprom? - Machete1401 - 21-10-2019
OK thnx...I will have a look into those.
Cheers