Does anybody know how to configure ICOM for 100kbit K-CAN mode? - Printable Version +- CarTechnoloGY (https://cartechnology.co.uk) +-- Forum: Discussions All about Software and Hardware (https://cartechnology.co.uk/forumdisplay.php?fid=310) +--- Forum: Automotive Help & Discussions / Software and Hardware (https://cartechnology.co.uk/forumdisplay.php?fid=40) +---- Forum: BMW - Mini - Rolls Royce (https://cartechnology.co.uk/forumdisplay.php?fid=61) +---- Thread: Does anybody know how to configure ICOM for 100kbit K-CAN mode? (/showthread.php?tid=58451) |
Does anybody know how to configure ICOM for 100kbit K-CAN mode? - volaltd - 24-10-2019 Does anybody know how to configure ICOM for 100kbit K-CAN mode and direct communication with ECUs? RE: Does anybody know how to configure ICOM for 100kbit K-CAN mode? - volaltd - 26-10-2019 Solved with USB D-CAN RE: Does anybody know how to configure ICOM for 100kbit K-CAN mode? - jararak - 28-10-2019 btw, in ediabas.ini you need to configure as REMOTE and setup ip which itoolradar shows you RE: Does anybody know how to configure ICOM for 100kbit K-CAN mode? - volaltd - 30-10-2019 (28-10-2019, 06:20 AM)jararak Wrote: btw, in ediabas.ini you need to configure as REMOTE and setup ip which itoolradar shows you There is 500kbit on OBD D-CAN, which REMOTE string makes it work at 100kbit? RE: Does anybody know how to configure ICOM for 100kbit K-CAN mode? - Bimmer540 - 30-10-2019 So icom is faster reading modules then obd d-can cable? RE: Does anybody know how to configure ICOM for 100kbit K-CAN mode? - Node - 30-10-2019 ICOM gets comm speed as protocol parameters. There is no need to manually switch it. Of course your software needs to properly send protocol parameters. |