+- CarTechnoloGY (https://cartechnology.co.uk)
+-- Forum: Discussions All about Software and Hardware (https://cartechnology.co.uk/forumdisplay.php?fid=310)
+--- Forum: Automotive Help & Discussions / Software and Hardware (https://cartechnology.co.uk/forumdisplay.php?fid=40)
+---- Forum: BMW - Mini - Rolls Royce (https://cartechnology.co.uk/forumdisplay.php?fid=61)
+---- Thread: F10 LCI exchange ahl xenon to bixenon ang coding HELP (/showthread.php?tid=58741)
F10 LCI exchange ahl xenon to bixenon ang coding HELP - BM_Garage - 30-10-2019
Hi i have problem with F10 Lci. Anbody doing somethig like that ? Oem is ahl xenon(adaptive xenon) i bought new lamps bixenon(no adaptive). I must coding new lamps in car. After connection in ista light modules is red. Anbody know how do it ? I have icom ista esys...
Thanks for help and answer!
RE: F10 LCI exchange ahl xenon to bixenon ang coding HELP - emhtuning - 30-10-2019
remove 524 from the FA and code FRM.
RE: F10 LCI exchange ahl xenon to bixenon ang coding HELP - lustek - 30-10-2019
Not so easy. Need to rewired.
1. Ahl are supply from rear fuse box, bixenon from frm
2. Bixenon shuter work from different pin in frm.
Go to newtis and search wiring. But in deatails daytime light, sta ding light, high beam. You see differences
RE: F10 LCI exchange ahl xenon to bixenon ang coding HELP - BM_Garage - 30-10-2019
Thanks ! I deleted 524 next Read Coding Data FRM and CODE FRM. Angel lights works properly but in ista STML AND STMR is red. Highlights do not work. Why ?
RE: F10 LCI exchange ahl xenon to bixenon ang coding HELP - lustek - 30-10-2019
You need to do initialization in ista
RE: F10 LCI exchange ahl xenon to bixenon ang coding HELP - BM_Garage - 30-10-2019
I cant do initialization becouse in ista STML and STMR is red - no communication. Fault codes S0311 and S0312 - no commuications with left and right with modules lights but angel lights works...
(30-10-2019, 10:32 AM)lustek Wrote: Not so easy. Need to rewired.
1. Ahl are supply from rear fuse box, bixenon from frm
2. Bixenon shuter work from different pin in frm.
Go to newtis and search wiring. But in deatails daytime light, sta ding light, high beam. You see differences
OMG ! I can't read these diagrams. Maybe it's enough to swap the pins.
RE: F10 LCI exchange ahl xenon to bixenon ang coding HELP - lustek - 30-10-2019
Most important is tms suplly. Bix tms need to be suply from frm, ahl directly from fuse.
I do conversion like yours and if i don't change this suply headlight not work properly. AE starts after few minutes after ignition off, lock car etc
RE: F10 LCI exchange ahl xenon to bixenon ang coding HELP - BM_Garage - 30-10-2019
I understand that I need to route the cable from frm to tms?
RE: F10 LCI exchange ahl xenon to bixenon ang coding HELP - lustek - 30-10-2019
Supply:
- right lamp : frm (pin 42) ---> headlight (pin 5)
- left lamp: frm (pin 7) ---> headlight (pin 5)
Bixenon shutter:
From pin 41 from frm to both lamp (pin 6 on left and right)
But, I dont remeber right now correct me if I am wrong, even in lci car tms modules of bixenon dont have corresponding ecu in tree. Only ahl. If you see stmr and stml ecu on list something is wrong with coding.
RE: F10 LCI exchange ahl xenon to bixenon ang coding HELP - BM_Garage - 30-10-2019
In LCI car bix tms and ahl tms have corresponding ecu in tree... In pre lci dont have corresponding ecu in tree.