• Individual control units are not recognized

(26-04-2023, 20:40 PM)Tadk Wrote:  Update_ODIS-Engineering_12.2-EU_Postsetup_120200.302.970_test


TEST! No guarantee!

For those who have experience and ability please check it by working on real cars and please write if you find errors or not.
This is not an official postsetup, so you use it on your own risk.
Corrected to work with Softing 505x interfaces under Engineering 12.2 and updates are from version Engineering 16.1.0-160100.201.40.

Don't spam thread and PM (Private Message) me for password.
If you want to get the password for my share you need to :
1) Have minimum reputation 25
2) To have at least 3 useful replies on previous updates that i posted until now.
3) Attach the diagnostic log to your feedback (please EDIT car's VIN number)

For those who do not have the necessary reputation, the previous version!

Before you start installing Odis from 5054 on Windows 10, you need to do the following:

1) install PDF viewer

2) enable: control panel - uninstall or change a program - enable or disable Windows features -.Net Framework 3.5

3) install font Arialuni

4) installed Visual C++

5) using file bat., install version 12.1.1 with the choice of 5054, then specify the postsetup from version 12.2
Attention: if you have installed or are going to install Service,
then you need to comment out the program folder during the installation
of programs or updates: Program Files (x86)\
##Offboard_Diagnostic_Information_System_Service
If after updating or installing a folder with the same name as the commented one appears,
then you need to delete it.
For example: if you install or update the service, then comment out the engineering,
if you install or update the engineering, then comment out the service.

6) The installation file of the program and the bat. file must be in the same folder.

For example Engineering, desktop location:
Run command prompt as administrator:
cd \Users\username\Desktop
run.bat OffboardDiagSetup-Engineering_12_1_1-0102_2.exe

For example Service, desktop location:
Run command prompt as administrator:
cd \Users\username\Desktop
run.bat OffboardDiagSetup-Service_VWMCD_6_2_0-0103_8.exe

(09-08-2023, 07:47 AM)VAGPRODRIVE Wrote:  

(26-04-2023, 20:40 PM)Tadk Wrote:  Update_ODIS-Engineering_12.2-EU_Postsetup_120200.302.970_test


TEST! No guarantee!

For those who have experience and ability please check it by working on real cars and please write if you find errors or not.
This is not an official postsetup, so you use it on your own risk.
Corrected to work with Softing 505x interfaces under Engineering 12.2 and updates are from version Engineering 16.1.0-160100.201.40.

Don't spam thread and PM (Private Message) me for password.
If you want to get the password for my share you need to :
1) Have minimum reputation 25
2) To have at least 3 useful replies on previous updates that i posted until now.
3) Attach the diagnostic log to your feedback (please EDIT car's VIN number)

For those who do not have the necessary reputation, the previous version!

Before you start installing Odis from 5054 on Windows 10, you need to do the following:

1) install PDF viewer

2) enable: control panel - uninstall or change a program - enable or disable Windows features -.Net Framework 3.5

3) install font Arialuni

4) installed Visual C++

5) using file bat., install version 12.1.1 with the choice of 5054, then specify the postsetup from version 12.2
Attention: if you have installed or are going to install Service,
then you need to comment out the program folder during the installation
of programs or updates: Program Files (x86)\
##Offboard_Diagnostic_Information_System_Service
If after updating or installing a folder with the same name as the commented one appears,
then you need to delete it.
For example: if you install or update the service, then comment out the engineering,
if you install or update the engineering, then comment out the service.

6) The installation file of the program and the bat. file must be in the same folder.

For example Engineering, desktop location:
Run command prompt as administrator:
cd \Users\username\Desktop
run.bat OffboardDiagSetup-Engineering_12_1_1-0102_2.exe

For example Service, desktop location:
Run command prompt as administrator:
cd \Users\username\Desktop
run.bat OffboardDiagSetup-Service_VWMCD_6_2_0-0103_8.exe

Diagnosed a lot of cars, works stably. But when you start, a message pops up. Archive in an attached file