CarTechnoloGY
ODIS-Engineering 12.2 Postsetup 1060 (test) - Printable Version

+- CarTechnoloGY (https://cartechnology.co.uk)
+-- Forum: Discussions All about Software and Hardware (https://cartechnology.co.uk/forumdisplay.php?fid=310)
+--- Forum: Automotive Help & Discussions / Software and Hardware (https://cartechnology.co.uk/forumdisplay.php?fid=40)
+---- Forum: VAG Group (VW - Audi - Seat - Skoda - Bentley) (https://cartechnology.co.uk/forumdisplay.php?fid=55)
+---- Thread: ODIS-Engineering 12.2 Postsetup 1060 (test) (/showthread.php?tid=59024)

Pages: 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27

RE: ODIS-Engineering 12.2 Postsetup 1040 (test) - Versus - 28-03-2024

ODIS-Engineering 12.2 Postsetup 1040 (test) not possible remove CP from gateway (Basis CP all modules) all cars (tested MQB, MEB skoda/VW). All time same java error. All other modules by one are ok.

Also not possible E-golf7 2020 delete DTC from ABS.

RE: ODIS-Engineering 12.2 Postsetup 1040 (test) - jinyouZ - 01-04-2024

(28-03-2024, 08:58 AM)Versus Wrote:  ODIS-Engineering 12.2 Postsetup 1040 (test) not possible remove CP from gateway (Basis CP all modules) all cars (tested MQB, MEB skoda/VW). All time same java error. All other modules by one are ok.

Also not possible E-golf7 2020 delete DTC from ABS.


Hello, friend
ODS5003E This error comes from the file "odis. data. GFS Diagnose date n v_900. xxx. 0"
I have tried all versions, and when Brand-V in Postsetup is greater than "odis. data. GFS Diagnosedate n-v_900.152.0", this issue occurs when executing the 060GFF/GFS function. Therefore, you are also considering using ODIS Engineering 12.2 Postsetup 670, as it should not encounter this error!
Thank you very much for Tadk's hard work!

RE: ODIS-Engineering 12.2 Postsetup 1060 (test) - wxwwxw - 12-04-2024

Will this version of ODIS-Engineering work with the DoIP protocol?
Will the BMW ENET (DoIP) cable work with the Skoda Octavia from 2022 on the mqbevo platform with this program?

RE: ODIS-Engineering 12.2 Postsetup 1060 (test) - RitterDussel - 14-04-2024

Yes it will work.

RE: ODIS-Engineering 12.2 Postsetup 1060 (test) - c20091929 - 30-04-2024

Question. Any updates in the future for 12.2?

Thank you!