Solved ✔ Mini R56 - Cannot reset VANOS adaptations - Printable Version +- CarTechnoloGY (https://cartechnology.co.uk) +-- Forum: Discussions All about Software and Hardware (https://cartechnology.co.uk/forumdisplay.php?fid=310) +--- Forum: Automotive Help & Discussions / Software and Hardware (https://cartechnology.co.uk/forumdisplay.php?fid=40) +---- Forum: BMW - Mini - Rolls Royce (https://cartechnology.co.uk/forumdisplay.php?fid=61) +---- Thread: Solved ✔ Mini R56 - Cannot reset VANOS adaptations (/showthread.php?tid=59098) |
Mini R56 - Cannot reset VANOS adaptations - maxwell4321 - 15-01-2022 Been pulling out what's left of my hair with this, Car is 2006 Mini R56 with N12 engine, DME is MED172 No matter what I cannot get the VANOS adaptations reset, ISTA+ reports IFH-006 Command not accepted Tried 3 different versions of INPA and datens including the one posted here today by @Maron All the INPA's reported ERROR #98 SYS-0008 JOB NOT FOUND, Ideas please RE: Mini R56 - Cannot reset VANOS adaptations - larshutten - 15-01-2022 What ilevel does the mini have? RE: Mini R56 - Cannot reset VANOS adaptations - maxwell4321 - 15-01-2022 I believe it has never had the iLevel updated so it will be the original 2006 RE: Mini R56 - Cannot reset VANOS adaptations - larshutten - 15-01-2022 There was a vanos firmware fix at some point don’t remember from what ilevel. So try to update dme first if it has old ilevel. RE: Mini R56 - Cannot reset VANOS adaptations - maxwell4321 - 16-01-2022 Trying to update by WinkFP using Update ZUSB and VIN then when I select Program I get this error, Assembly identification number not found in files determined by xxkfconf.da2 According to UIF DME is MEV17_2 ZB is 7572260 but part number is 7600076 I looked up the part numbers on realoem for replacement ECU and that number does not exist. RE: Mini R56 - Cannot reset VANOS adaptations - maxwell4321 - 16-01-2022 Ok have now solved this, updated ILevel with Ista/P and used Ista+ to reset the adaptations |