+- CarTechnoloGY (https://cartechnology.co.uk)
+-- Forum: Discussions All about Software and Hardware (https://cartechnology.co.uk/forumdisplay.php?fid=310)
+--- Forum: Automotive Help & Discussions / Software and Hardware (https://cartechnology.co.uk/forumdisplay.php?fid=40)
+---- Forum: BMW - Mini - Rolls Royce (https://cartechnology.co.uk/forumdisplay.php?fid=61)
+---- Thread: After flash NBTEvo id6 problem with 6AE (/showthread.php?tid=59390)
Pages:
1
2
After flash NBTEvo id6 problem with 6AE - bmw44 - 20-01-2022
Hello friends,
After an NBTEVO flash ID4 to ID6, I must absolutely delete "6AE" otherwise I cannot inject CAFD.
Thus without "6AE", the navigation no longer works (starting the system without stopping)
Has anyone had this problem before please ?
RE: After flash NBTEvo id6 problem with 6AE - xiaokewu - 20-01-2022
After an NBTEVO flash ID4 to ID6，You must import the fake FSC
RE: After flash NBTEvo id6 problem with 6AE - flashxcode - 20-01-2022
(20-01-2022, 00:11 AM)bmw44 Wrote: Hello friends,
After an NBTEVO flash ID4 to ID6, I must absolutely delete "6AE" otherwise I cannot inject CAFD.
Thus without "6AE", the navigation no longer works (starting the system without stopping)
Has anyone had this problem before please ?
yes. before VO code you need to unlock it. I suspect it's vo locked!
Use feature installer to unlock it.
After that leave the FA with 6AE and VO code the unit.
It should work.
I can provide you a feature installer code to vo unlock the unit.
Cheers!
RE: After flash NBTEvo id6 problem with 6AE - bmw44 - 20-01-2022
(20-01-2022, 08:35 AM)flashxcode Wrote:(20-01-2022, 00:11 AM)bmw44 Wrote: Hello friends,
After an NBTEVO flash ID4 to ID6, I must absolutely delete "6AE" otherwise I cannot inject CAFD.
Thus without "6AE", the navigation no longer works (starting the system without stopping)
Has anyone had this problem before please ?
yes. before VO code you need to unlock it. I suspect it's vo locked!
Use feature installer to unlock it.
After that leave the FA with 6AE and VO code the unit.
It should work.
I can provide you a feature installer code to vo unlock the unit.
Cheers!
Thank you for your reply flashxcode.
So if I understand correctly, I have to use your coding fix and then add in the FA "6AE" and code the unit?
RE: After flash NBTEvo id6 problem with 6AE - flashxcode - 20-01-2022
yes exactly that!
RE: After flash NBTEvo id6 problem with 6AE - moreply - 20-01-2022
You can use any VO Coding fix. But flashxcode will sure help you if you have other questions
After Installing the Fix you can VO Code the unit.
RE: After flash NBTEvo id6 problem with 6AE - bmw44 - 20-01-2022
thank you very much flashcode and moreply
I will test and get back to you.
RE: After flash NBTEvo id6 problem with 6AE - Fatalix - 20-01-2022
Basicly why VO lock happens is due to mismatch of vehicle order and the newly flashed headunit. A perfectly written vehicle order would make it not locking, but it requires enormous knowledge of the headunit and current car - a far bigger job than getting the vo unlocked with feature installer right after flash has been done, then you can code the newly flashed headunit with the original vehicle order with no issues whatsoever, and do the few changes necessary.
RE: After flash NBTEvo id6 problem with 6AE - bmw44 - 28-01-2022
Hello, I tested VO Code fix before putting 6AE but it doesn't work.
Could someone please help me?
RE: After flash NBTEvo id6 problem with 6AE - elthox - 29-01-2022
its not coding fix issue. Of course first thought comes about vo lock.
I had similar issue after id6 flash. After vo fix, 6ac and 6ae always give coding error.
I suspect is something wrong with ATM connection that blocks the evo coding. Didnt solve it yet.