Solved ✔ DACIA DCM 3.4 Clone problem - Printable Version +- CarTechnoloGY (https://cartechnology.co.uk) +-- Forum: All About IMMO/ECU , ChiPTuninG , Dashboard , Locksmith , AirbaG , Carradio (https://cartechnology.co.uk/forumdisplay.php?fid=3) +--- Forum: IMMO & LOCKSMITH (https://cartechnology.co.uk/forumdisplay.php?fid=9) +--- Thread: Solved ✔ DACIA DCM 3.4 Clone problem (/showthread.php?tid=59433) |
DACIA DCM 3.4 Clone problem - GanPower - 20-01-2022 Hello mates, 2 weeks ago i had to clone dcm 3.4 for Dacia Duster. I succesfully read and write flash with KTAG and also read and write eeprom with VVDI Prog by pinout. I put cloned ecu on car, it started ok but i cannot accelerate, acceleration pedal is not recognized. This week just for testing changed same type of ecu ( DCM 3.4 ) on a Dacia Logan same engine (1.5 DCI ), this time i just read eeprom from original and write to donor ECU, no flash . Also car start but no acceleration. Any advice? Thank you in advance Attached below duster backups for any check RE: DACIA DCM 3.4 Clone problem - volavka - 20-01-2022 post dtc log from ECM seems wiring problem Br.V RE: DACIA DCM 3.4 Clone problem - flavio69 - 21-01-2022 If injector codes doesn't mach...car starts but no reaction to acceleration RE: DACIA DCM 3.4 Clone problem - raffy haddad - 21-01-2022 As @flavio69 mention need to recode injectors Regards RE: DACIA DCM 3.4 Clone problem - GanPower - 26-01-2022 Problem solved by coding injectors. Thank you all!! |