+- CarTechnoloGY (https://cartechnology.co.uk)
+-- Forum: All About IMMO/ECU , ChiPTuninG , Dashboard , Locksmith , AirbaG , Carradio (https://cartechnology.co.uk/forumdisplay.php?fid=3)
+--- Forum: CHIPTUNING (https://cartechnology.co.uk/forumdisplay.php?fid=12)
+--- Thread: No Feedback Given marelli mm10ja remap problem (/showthread.php?tid=60017)
marelli mm10ja remap problem - jtdpow - 01-02-2022
hi,got a problem with this ecu,car is a alfa giulia 280hp petrol,a friend do a remapfile for it,but after a 10 seconds at full throttle boost raise of 2900 mbar to 2200mbar and car seems dont want speed up for other 10 seconds,then boost raise again,seems any limiter by temp but cant find,someone point us in the right direction?
ori and mod file in attached
RE: marelli mm10ja remap problem - Mis - 01-02-2022
2900mbar for stg1 2.0t 280hp mm10ja is too much. 2700mbar is enough.
RE: marelli mm10ja remap problem - jtdpow - 01-02-2022
(01-02-2022, 11:07 AM)Mis Wrote: 2900mbar for stg1 2.0t 280hp mm10ja is too much. 2700mbar is enough.
you think?
stock pressure at max is 2760mbar
RE: marelli mm10ja remap problem - benii75 - 01-02-2022
first you have differens size files
ori from your mod is different size
boost request is 2990mbar
repair tune is not good missed many maps and wrong tuned
RE: marelli mm10ja remap problem - jtdpow - 02-02-2022
(01-02-2022, 14:43 PM)benii75 Wrote: first you have differens size filesok,thanks,can you help?
ori from your mod is different size
boost request is 2990mbar
repair tune is not good missed many maps and wrong tuned
wich maps missed?
too much boost ?
its possible the cuts of power is for exceed map sensor max value?
RE: marelli mm10ja remap problem - magi1984 - 04-02-2022
hello, if you want try my file, pass in pm