E61 - coding new SZL - Printable Version +- CarTechnoloGY (https://cartechnology.co.uk) +-- Forum: Discussions All about Software and Hardware (https://cartechnology.co.uk/forumdisplay.php?fid=310) +--- Forum: Automotive Help & Discussions / Software and Hardware (https://cartechnology.co.uk/forumdisplay.php?fid=40) +---- Forum: BMW - Mini - Rolls Royce (https://cartechnology.co.uk/forumdisplay.php?fid=61) +---- Thread: E61 - coding new SZL (/showthread.php?tid=60092) |
E61 - coding new SZL - Jasonpe61 - 02-02-2022 Hi I been trying to calibrate my new SZL , I’m having trouble calibrating the steering angle sensor. I’ve tried tool32 and ISTA and it fails . I’ve matched the VIN so it’s not that Any other ideas be great RE: E61 - coding new SZL - jaki - 02-02-2022 Usually wrong part (number). is there any error codes in ISTA? RE: E61 - coding new SZL - Jasonpe61 - 02-02-2022 hi thanks for the reply yes these are the errors I get from ISTA SZL : 9501 / 94C1 DSC : 5EBA / 5DCF Thanks RE: E61 - coding new SZL - radeff - 02-02-2022 Trying first to code with Ncs expert.. RE: E61 - coding new SZL - Jasonpe61 - 02-02-2022 What do i need to do Thanks RE: E61 - coding new SZL - TomoR - 02-02-2022 Flash SZL,code and then you can calibrate lws sensor RE: E61 - coding new SZL - Jasonpe61 - 02-02-2022 (02-02-2022, 19:13 PM)radeff Wrote: Trying first to code with Ncs expert.. (02-02-2022, 20:31 PM)TomoR Wrote: Flash SZL,code and then you can calibrate lws sensor Ok thanks do you have a guide to follow ? I understand the procedure just need more details Thanks RE: E61 - coding new SZL - DieStream - 02-02-2022 Do u get system time error? RE: E61 - coding new SZL - Node - 02-02-2022 (02-02-2022, 19:00 PM)Jasonpe61 Wrote: hi thanks for the reply Why people think everyone tries to remember thousands of possible codes? RE: E61 - coding new SZL - sparky001 - 03-02-2022 Maybe Google remembers... 9501 Steering angle sensor calibration. 94C1: Coding/data error. 5EBA (DSC Steering-angle sensor plausibility), 5DCF (DSC Control unit undervoltage), Looks like not coded correctly & initialized |