E61 - coding new SZL - Printable Version +- CarTechnoloGY (https://cartechnology.co.uk) +-- Forum: Discussions All about Software and Hardware (https://cartechnology.co.uk/forumdisplay.php?fid=310) +--- Forum: Automotive Help & Discussions / Software and Hardware (https://cartechnology.co.uk/forumdisplay.php?fid=40) +---- Forum: BMW - Mini - Rolls Royce (https://cartechnology.co.uk/forumdisplay.php?fid=61) +---- Thread: E61 - coding new SZL (/showthread.php?tid=60092) |
RE: E61 - coding new SZL - Jasonpe61 - 03-02-2022 (03-02-2022, 13:32 PM)TomoR Wrote: Bad or old script in INPA....but this is not now important...for this job INPA not need. thanks so just to clarify 1. winkfp flash SZL ZUsb 2. code SZL using NCSExpert code to default 3.Tool 32 sensor calibrate 4. Start system time ? Thanks RE: E61 - coding new SZL - TomoR - 03-02-2022 (03-02-2022, 14:05 PM)Jasonpe61 Wrote:(03-02-2022, 13:32 PM)TomoR Wrote: Bad or old script in INPA....but this is not now important...for this job INPA not need. Yes....if 1 an 2 its done without errors then 3 and 4 can be done with ISTA+. RE: E61 - coding new SZL - elthox - 03-02-2022 its been some time not calibrating E60 but i think is not dsc prg. Check in szl.prg if there is the function of calibrration. Always assuming the coding has been done. RE: E61 - coding new SZL - Jasonpe61 - 04-02-2022 Thanks for your help unfortunately dropped my laptop and smashed it so another one is on Order once I manage to get to try it out il let you guys know RE: E61 - coding new SZL - danis11 - 04-02-2022 Why can't all this be done in one click with ISTA-P, if szl is new? Why run on different programs? ISTA-P will determine the compatibility and sequence of actions with your help. Why complicate your life, especially if you do not understand the registration process. Indicate in ISTA-P that szl has been replaced and say that you need to register it in full. It will even update the program if you want it. RE: E61 - coding new SZL - Node - 04-02-2022 ISTA-P will do it even if SZL is used. RE: E61 - coding new SZL - jaki - 04-02-2022 (04-02-2022, 16:36 PM)danis11 Wrote: Why can't all this be done in one click with ISTA-P, if szl is new? Why run on different programs? ISTA-P will determine the compatibility and sequence of actions with your help. Why complicate your life, especially if you do not understand the registration process. Can't agree more RE: E61 - coding new SZL - elthox - 04-02-2022 but if ista p forces to update other modules you dont wanna update then think twice RE: E61 - coding new SZL - Jasonpe61 - 05-02-2022 (04-02-2022, 16:36 PM)danis11 Wrote: Why can't all this be done in one click with ISTA-P, if szl is new? Why run on different programs? ISTA-P will determine the compatibility and sequence of actions with your help. Why complicate your life, especially if you do not understand the registration process. I didn’t know you could , I haven’t seen any information about using ista-P to do this .. what’s the steps on doing it with this program Thanks RE: E61 - coding new SZL - Node - 05-02-2022 (04-02-2022, 22:00 PM)elthox Wrote: but if ista p forces to update other modules you dont wanna update then think twice When using loader in expert mode you can uncheck all other modules. (05-02-2022, 00:17 AM)Jasonpe61 Wrote:(04-02-2022, 16:36 PM)danis11 Wrote: Why can't all this be done in one click with ISTA-P, if szl is new? Why run on different programs? ISTA-P will determine the compatibility and sequence of actions with your help. Why complicate your life, especially if you do not understand the registration process. Run it. Identify car. Tell it SZL was replaced. Wait some time. Done. After that initialize steering ange using ISTA+. |