Solved ✔ mb w204 crd3.10 failed obd writing - Printable Version +- CarTechnoloGY (https://cartechnology.co.uk) +-- Forum: All About IMMO/ECU , ChiPTuninG , Dashboard , Locksmith , AirbaG , Carradio (https://cartechnology.co.uk/forumdisplay.php?fid=3) +--- Forum: CHIPTUNING (https://cartechnology.co.uk/forumdisplay.php?fid=12) +--- Thread: Solved ✔ mb w204 crd3.10 failed obd writing (/showthread.php?tid=60313) |
mb w204 crd3.10 failed obd writing - Trys2penki - 07-02-2022 Hi. ive got a problem. I was doing dpf off for w204 om651 crd3.10. Disabled dpf in coding section with vediamo, read flash, disabled dpf in flash, write it back, and kess gave error on 100%. now no response from dme. Put original flash on table with boot mode, still no response from ecu. Can someone help me? As far as i know eeprom is corupted. RE: mb w204 crd3.10 failed obd writing - loki954 - 07-02-2022 read all with ktag and post the two files from obd and boot read, but i think you killed it more with the obd write on boot. you need boot read and write. if you write obd read by boot you are in a worse situation then before RE: mb w204 crd3.10 failed obd writing - moriaz - 07-02-2022 what i did on a sid 211 is read in boot and compare obd read with boot read and fix file then upload the fix file see if that helps you RE: mb w204 crd3.10 failed obd writing - Trys2penki - 07-02-2022 its org file obd read, dpf off file, and dpf off file boot read. RE: mb w204 crd3.10 failed obd writing - Jurebv - 08-02-2022 try writing original file in boot as boot and obd files looks indentical so it just might be checksum calculation problem (other possibility is that kess wiped int flash completely and written just obd part) first write obd read (original file not dpfoff !) in boot and try RE: mb w204 crd3.10 failed obd writing - loki954 - 08-02-2022 (08-02-2022, 05:25 AM)Jurebv Wrote: try writing original file in boot as boot and obd files looks indentical so it just might be checksum calculation problem (other possibility is that kess wiped int flash completely and written just obd part) he did that, so my guess is as yours , int flash is wiped and only the obd part is in it RE: mb w204 crd3.10 failed obd writing - Trys2penki - 08-02-2022 yes, ive done that, nothing. today writing other files from other ecu with same p/n. RE: mb w204 crd3.10 failed obd writing - donesko - 08-02-2022 whether delphi has virutal eeprom in flash like MB edc16 ? RE: mb w204 crd3.10 failed obd writing - loki954 - 08-02-2022 you are missing lines from 1FFFE0 to 3744EF Here file that i have closest to yours, not lose anything to try. Write with ktag if you have RE: mb w204 crd3.10 failed obd writing - Trys2penki - 08-02-2022 (08-02-2022, 11:01 AM)loki954 Wrote: you are missing lines from 1FFFE0 to 3744EF You are absolutely right. Write flash from other ecu with same part number, write original eeprom of my ecu, car runs fine. Problem was not in corupted eeprom, but in failed obd read that was mising some data like You said. |